10 Inch Rough-In Toilets

A 10 inch rough-in toilet has its floor outlet centered 250 mm (10 in) from the finished wall, a setting often used in compact bathrooms and in older buildings where the drain sits closer to the wall than the common 12 in. This collection holds 78 ceramic toilets that list a 10 in S-trap: 63 one-piece, 14 two-piece and 1 smart toilet. Of these, 77 also list a 180 mm P-trap rear outlet, and many add 12, 8, 16 or 6 in settings. Washdown is listed on 41 models, swirl on 22, rimless on 13 and siphonic on 11. Body lengths run from 635 to 750 mm and heights from 465 to 860 mm. White is listed on 77 models. The range suits renovation, apartment and hotel projects that need to fit an existing 10 in drain.

Leistung
OEM / ODM · kostenlose Form ab 300 Stück
MOQ
1×20ft-Container · beliebiger Produktmix
Lieferzeit
30–45 Tage nach dem Muster
78 Produkte

Sende ein Pflichtenheft. Erhalte ein echtes Angebot innerhalb von 12 Geschäftsstunden.

Nur B2B. Keine automatisierten Antworten, keine Standardkataloge. Ein SANIKB-Ingenieur prüft Ihre Anfrage und antwortet innerhalb von 12 Geschäftsstunden mit Machbarkeit, Mindestbestellmenge, Lieferzeit und einem detaillierten Angebot.

Ein aufgeschlüsseltes Angebot — statt fünf
Machbarkeit & Zertifizierung je nach Markt geprüft
Haben Sie eine Spezifikationsdatei? Fügen Sie sie unten Ihrer Anfrage bei.
— Projektanfrage Nur B2B
Bitte geben Sie Ihren Vornamen ein.
Bitte geben Sie Ihren Unternehmensnamen ein.
Bitte geben Sie eine gültige E-Mail-Adresse ein.
Bitte geben Sie Ihre Telefonnummer ein.
Ziehen & ablegen oder Dateien auswählen PDF / IMG / XLS · 4MB ×3
    Antwort eines Ingenieurs innerhalb von 12 Geschäftsstunden

    Herstellerdokumentation

    Der Geltungsbereich der Zertifizierungen hängt vom gewählten Modell und Zielmarkt ab. Fordern Sie die modellspezifischen Unterlagen mit Ihrem Angebot an.

    IAPMO-cUPC-Zertifikat
    ISO-9001-Zertifikat für Qualitätsmanagement
    WRAS-Zertifikat für das zugelassene Produkt
    IAPMO-Listungszertifikat
    UDEM-Zertifikat für die technische CE-Prüfung

    Häufige Fragen

    Which 10 inch rough-in toilets are in this collection?

    The collection holds 78 toilets that list a 10 in S-trap rough-in: 63 one-piece, 14 two-piece and 1 smart toilet. Body lengths run from 635 to 750 mm, widths from 340 to 430 mm and heights from 465 to 860 mm. Use the type filter to split one-piece from two-piece bodies, or browse the full one-piece toilet range.

    How is a 10 inch rough-in measured?

    Rough-in is measured from the finished wall, not the baseboard, to the center of the floor drain. A 10 in rough-in means about 250 mm. A toilet with a 12 in rough-in will not sit flush against the wall over a 10 in drain, so measure on site first, then confirm the setting against the drawing on each product page.

    Do these toilets list other outlet options?

    Yes, many do. 77 of the 78 models also list a 180 mm P-trap rear outlet for drains that run through the wall, and selected models add 12 in (26 models), 8 in (10), 16 in (10) or 6 in (1) S-trap settings. Each product page shows the settings listed for that model, and the rear outlet toilet collection groups the P-trap range.

    What is the MOQ and lead time for 10 inch rough-in toilets?

    MOQ, samples and lead time are quoted per model, because they depend on the model mix, finish, carton marking and destination. Send the 10 inch rough-in toilet models, quantities and destination port in one inquiry, and the quotation states each figure line by line. Written replies are issued within 12 business hours, so a project schedule can be checked before the order is placed.

    Can 10 inch rough-in toilets carry our own brand?

    Private-label supply runs through the SANIKB OEM and ODM program: brand marking on the product, carton and inserts, with documents prepared model by model. Certification marks are listed per model (some models print CE or cUPC), so name the target market and the marks it requires, and the quotation lists which models fit. Mixed containers can carry one-piece and two-piece models together.

    How should a distributor choose among the 10 inch models?

    Start with the body: one-piece models give a single seamless form, while two-piece models pair a separate tank and bowl. Next, choose a flushing style, washdown, swirl, rimless or siphonic, where listed. Then compare body length, which runs from 635 to 750 mm, against the room depth, since a 10 in rough-in often goes with a tighter bathroom.