Pedestal Sink Dimensions: Width, Projection and Rim Height
Across 81 SANIKB pedestal sinks, width runs 350–665 mm and 70 of 80 models stand 850 mm (33.5 in) to the rim.
Auf dieser Seite
Quick answer: Across 81 sized SANIKB pedestal sinks, 57 fall in the standard band of 401–520 mm (15.8–20.5 in) wide, 16 are compact at 400 mm or less, and 8 are wide at 521 mm or more. The standard pedestal sink height in the SANIKB range is 850 mm (33.5 in) floor to rim, shared by 70 of 80 models with a published floor-to-rim figure. Three of 80 SANIKB pedestal sinks publish a rim higher than 865 mm (34 in): SP1053 at 870 mm, C4005 at 875 mm and SP1031 at 890 mm. Of 81 sized SANIKB pedestal sinks, 68 have the same width and front-to-back depth, so their plan is square or round rather than wider than deep.
Pedestal sink dimensions come down to three numbers: width across the front, front-to-back depth, and height from the floor to the rim. Across 81 sized SANIKB pedestal sinks, width runs 350–665 mm (13.8–26.2 in) and front-to-back runs 350–520 mm (13.8–20.5 in). Rim height clusters hard at one figure: 70 of 80 models stand 850 mm (33.5 in) to the rim.
That cluster is the useful part. You can set your mirror, faucet and wall plumbing around 850 mm before making the final pedestal sink choice. Width and depth are where models really differ, so those two numbers decide whether a pedestal sink fits the room.
This guide gives you the size bands, a model table, the height outliers, the ADA arithmetic and the drawing checks. It covers sizing decisions only. Fixing and trap work belong in a separate installation guide.
Pedestal sink dimensions at a glance: is there a standard size?
There is no single standard size for width, so start there, because it is the number the wall gives you. We sorted the 81 sized models into three bands. The band tells you how many options you have before you look at design or material.
| Width band | Width range | Models in band | Examples from the range |
|---|---|---|---|
| Compact | ≤400 mm (≤15.7 in) | 16 of 81 | SP1040 350 mm, SP1045 380 mm, SP1001 400 mm, C4005 400 mm |
| Standard | 401–520 mm (15.8–20.5 in) | 57 of 81 | 1006 460 mm, 1001B 500 mm, 1004 510 mm, SP1065 520 mm |
| Wide | ≥521 mm | 8 of 81 | SP1051 550 mm, NBK-204 555 mm, SP1043 600 mm, NBK-211 665 mm |
Across 81 sized SANIKB pedestal sinks, 57 fall in the standard band of 401–520 mm (15.8–20.5 in) wide, 16 are compact at 400 mm or less, and 8 are wide at 521 mm or more. If your wall can only take a compact model, you are choosing from 16. If you need a wide basin, you are choosing from 8.
Height barely moves across these bands. A compact 350 mm model and a wide 600 mm model can share the same 850 mm rim. So the band decision is about the room, not about the people using it.
How to read a pedestal sink size line
Every SANIKB size line follows one order: width × front-to-back × overall height. Millimeters control. Inch figures are printed or converted to 0.1 in, so use the mm value on drawings and purchase orders.
Overall height means rim height for every model but one. SHY-304H publishes 480 × 470 × 520 mm, and its 520 mm is the complete body height. The page states that figure is not an internal bowl depth or a finished installation height. Treat it as a body measurement and get the drawing before you plan a rim height around it.
Two more reading rules save confusion:
- Ceramic NBK pages print "length × width". Read that as width across, then front-to-back. NBK-211 at 665 × 520 mm is 665 mm across the wall.
- Model 1002 comes as 1002A or 1002B, and the drawing is supplied on request. Do not plan a niche around it until you have that drawing.
Bowl interior depth, waste position and tap drilling for most stone and concrete models are on the drawing or spec sheet, so ask for them with the quote.
Pedestal sink width: what each band fits
Compact pedestals: 400 mm and under
The compact band suits powder rooms, tight spaces beside a door, and secondary basins in larger suites. The smallest plan in the range is the Indian green marble pedestal sink SP1040 at 350 × 350 × 850 mm. Its rim still sits at 850 mm, so a compact plan does not mean a low basin.
Most compact models are stone at a 400 mm width: SP1001, SP1004, SP1009, SP1010, SP1014, SP1016, SP1018, SP1026, SP1030, SP1034, SP1036 and SP1069, plus the taller SP1031 and the concrete C4005. The Carrara White marble SP1045 sits between them at 380 × 380 × 850 mm. A small plan means a small bowl, so check the drawing to see whether the bowl will fit the use.
Standard pedestals: 401–520 mm
This band holds 57 of 81 models, so it is where you get the widest choice of shape, stone and design. Ceramic sits here too. The faceted square 1006 is 460 × 460 × 850 mm. The tapered round 20-inch ceramic pedestal sink 1001B is 500 × 500 × 850 mm.
Use the standard band as your default for guest bathrooms and hotel rooms. It gives a usable bowl without crowding the toilet or the door.
Wide pedestals: 521 mm and over
Only 8 models are wider than 520 mm. The widest is the oval ceramic pedestal basin NBK-211 at 665 × 520 × 845 mm. The widest stone codes reach 600 mm, such as SP1043 at 600 × 450 × 850 mm. The full wide list is SP1051, SP1053, NBK-204, SP1056, SP1043, SP1054, SP1055 and NBK-211, so a wide-basin brief has eight candidates to compare on depth.
A wide pedestal gives a larger bowl face and, on off-center designs such as SP1054, some deck beside the bowl. Check the drawing for usable rim width. It is not storage, so plan a shelf or cabinet elsewhere if the room needs it.
Pedestal sink measurements by model: the comparison table
The table lists 20 models across all three bands and all three materials. The table is ordered from narrowest to widest. Use it to shortlist, then confirm the drawing for your final pick.
| Model | Material | Width × front-to-back × height (mm) | Inches | Band |
|---|---|---|---|---|
| SP1040 | Stone | 350 × 350 × 850 | 13.8 × 13.8 × 33.5 | Compact |
| SP1045 | Stone | 380 × 380 × 850 | 15 × 15 × 33.5 | Compact |
| C4005 | Concrete | 400 × 400 × 875 | 15.7 × 15.7 × 34.4 | Compact |
| SP1001 | Stone | 400 × 400 × 850 | 15.7 × 15.7 × 33.5 | Compact |
| SP1031 | Stone | 400 × 400 × 890 | 15.7 × 15.7 × 35 | Compact |
| SP1003 | Stone | 430 × 430 × 600 | 16.9 × 16.9 × 23.6 | Standard |
| C4006 | Concrete | Ø440 × 850 | Ø17.3 × 33.5 | Standard |
| 1006 | Ceramic | 460 × 460 × 850 | 18.1 × 18.1 × 33.5 | Standard |
| SHY-304H | Ceramic | 480 × 470 × 520 (body height) | 18.9 × 18.5 × 20.5 | Standard |
| 1001B | Ceramic | 500 × 500 × 850 | 19.7 × 19.7 × 33.5 | Standard |
| NBK-281L | Ceramic | 500 × 420 × 830 | 19.7 × 16.5 × 32.7 | Standard |
| 1004 | Ceramic | 510 × 460 × 860 | 20.1 × 18.1 × 33.9 | Standard |
| NBK-203 | Ceramic | 515 × 445 × 830 | 20.3 × 17.5 × 32.7 | Standard |
| SP1065 | Stone | 520 × 520 × 850 | 20.5 × 20.5 × 33.5 | Standard |
| SP1051 | Stone | 550 × 450 × 850 | 21.7 × 17.7 × 33.5 | Wide |
| SP1053 | Stone | 550 × 400 × 870 | 21.7 × 15.7 × 34.3 | Wide |
| NBK-204 | Ceramic | 555 × 445 × 830 | 21.9 × 17.5 × 32.7 | Wide |
| SP1043 | Stone | 600 × 450 × 850 | 23.6 × 17.7 × 33.5 | Wide |
| SP1054 | Stone | 600 × 380 × 850 | 23.6 × 15 × 33.5 | Wide |
| NBK-211 | Ceramic | 665 × 520 × 845 | 26.2 × 20.5 × 33.3 | Wide |
Three patterns stand out. Ceramic models are never compact: the narrowest is 460 mm. Stone covers every band. Half the rows leave 850 mm because the table includes every height outlier; across the full range only 10 of 80 do.
Standard pedestal sink height: why 850 mm dominates
The standard pedestal sink height in the SANIKB range is 850 mm (33.5 in) floor to rim, shared by 70 of 80 models with a published floor-to-rim figure. Stone is the most uniform group, whatever the design. Of 70 stone pedestals, 67 stand at 850 mm.
Ceramic is less uniform, and the spread matters if you mix models in one project:
- 830 mm (32.7 in): NBK-203, NBK-204, NBK-281L and NBK-282L.
- 845 mm (33.3 in): NBK-211.
- 850 mm (33.5 in): 1001B and 1006.
- 860 mm (33.9 in): the one-piece 1004.
The gap between 830 mm and 860 mm is 30 mm. In a hotel corridor of identical rooms, one model per room type keeps every mirror and backsplash line the same. If you change model mid-project, recheck the mirror height and the faucet spout against the new rim.
Pedestal height is fixed at manufacture. There is no adjustable leg, so the figure is the rim you get once the finish is down and level.
How tall is a pedestal sink outside the 850 mm norm
Four stone and concrete models publish a height far from 850 mm. Each one changes a site decision, so flag them early.
- SP1003 at 600 mm (23.6 in). The Jazz White marble fluted cylinder pedestal basin SP1003 has a short column. Either the rim is meant to sit low, or the piece stands on a plinth that makes up the difference. Plinth height and footprint are a site decision.
- SP1053 at 870 mm (34.3 in). A tapered travertine cross-base model, 550 × 400 mm in plan.
- C4005 at 875 mm (34.4 in). A fluted outdoor concrete model with a Ø398 mm round basin top in a 400 × 400 mm body.
- SP1031 at 890 mm (35 in). The tallest published floor-to-rim figure in the range.
The ribbed travertine pedestal basin SP1031 sits 40 mm above the 850 mm norm. It also pushes the rim past the accessibility limit discussed next.
For SP1003, decide the plinth before you rough in the wall. The plinth height sets the rim, and the rim sets the tap position on the wall.
Pedestal sink height and the ADA 34 in rim limit
In covered facilities, your specifier checks lavatories against the 2010 ADA Standards, section 606 (U.S. Access Board). Section 606.3 sets the front of the rim or counter at 34 in (865 mm) maximum above the finish floor. Section 606.2 adds a forward-approach clear floor space of 30 x 48 in with knee and toe clearance.
Three of 80 SANIKB pedestal sinks publish a rim higher than 865 mm (34 in): SP1053 at 870 mm, C4005 at 875 mm and SP1031 at 890 mm. It is not a compliance claim for any model, in either direction.
At 33.5 in, the 850 mm norm sits just under the 34 in maximum. Because a pedestal stands on the finished floor, its rim height above that floor does not change with tile thickness. What does shift is every rough-in height measured from the slab, so set waste and supply heights from finished floor level.
Rim height is only half the check. The knee and toe clearance in 606.2 is a separate test, and a pedestal column sits right where knees go. Your specifier should review the drawing of any pedestal planned for an accessible room. For the full checklist, see our guide to ADA bathroom sink requirements.
Front-to-back depth: how far the basin projects from the wall
Front-to-back depth is how far the basin stands out from the finished wall. It decides walking clearance in front of the sink and the swing of a nearby door. Across 81 sized models, depth runs 350–520 mm (13.8–20.5 in).
Depth clusters between 400 and 450 mm. The published counts are 15 models at 400 mm, 12 at 420 mm, 13 at 430 mm and 18 at 450 mm. Only 2 models reach 520 mm: SP1065 and NBK-211.
Most stone and concrete pedestals are square or round in plan. Of 81 sized SANIKB pedestal sinks, 68 have the same width and front-to-back depth, so their plan is square or round rather than wider than deep. That matters in a narrow room. A square 450 mm model projects as far as it is wide.
If projection is the limit, start with SP1040 at 350 mm deep. If you also need width, look for a shallow-but-wide shape:
- SP1056 at 560 × 360 mm. The wide-format plan with the least projection in the range. Take the 360 mm from the spec line.
- SP1054 and SP1055 at 600 × 380 mm. The walnut banded travertine pedestal basin SP1054 has an off-center bowl and the widest face (600 mm) at 380 mm projection.
- SP1053 at 550 × 400 mm. Take the 400 mm depth from the spec line. Its plan drawing shows one figure only, so confirm the shape on the drawing.
- NBK-281L at 500 × 420 mm. A rectangular ceramic pedestal sink that is 80 mm shallower than it is wide.
Top depth versus column depth at the floor
The size line gives the largest plan. On most ceramic models that is the rim, and the column is smaller at the floor. On stone that flares toward the floor, such as SP1001, the base can be the widest point. That changes floor tile layout, baseboards and how close a wall-mounted bin or radiator can sit.
The rectangular ceramic pedestal basin NBK-281L drawing shows the gap clearly. The top is 420 mm deep, while the column measures 315 mm deep at the floor. The bowl overhangs the column by about 105 mm.
Stone shapes vary the other way. SP1001 keeps a narrow shaft under the bowl and spreads toward the floor. SP1065 is 520 × 520 mm at its widest point, and the body narrows toward the base. Two models with similar size lines can leave very different floor footprints.
Use the drawing, not the size line, when you set out tiles or check baseboards. A column that meets a baseboard needs either a notch or a gap you plan for in advance.
What the pedestal column hides: plumbing openings on the drawing
A pedestal hides the waste and supply plumbing inside or behind the column. How much it hides depends on the openings the factory casts into the body. Only two ceramic drawings in this group print those openings.
- 1001B: a rear access opening of 200 × 110 mm (7.9 × 4.3 in) and a 110 mm (4.3 in) lower opening. The drawing marks 110 mm as an opening diameter. The bottom view marks a 150 mm circle.
- 1006: a 120 x 220 mm rear slot and a 100 mm opening. The bottom view marks a 180 mm circle.
Read those figures as openings in the body, not as drain heights. The waste height and the supply positions still have to be confirmed on the full spec drawing.
For stone and concrete models, the waste position is on the spec sheet or drawing on request. C4005 and C4006 normally take the tap off the wall, and tap and waste are not included with either. Plan your wall rough-in only after the drawing is in hand. Our article on bathroom sink rough-in dimensions covers the plumbing side.
Also check tap drilling. The 1001B has a single faucet hole at the rear of the rim; confirm the overflow configuration on the approved drawing. The 1004 has one back-center faucet hole. Confirm tap drilling on the drawing before you close the wall.
Pedestal sink sizes by material: ceramic, stone and concrete
Material changes the size range you can choose from. The table gives the published spread for each family.
| Family | Sized models | Width | Front-to-back | Overall height |
|---|---|---|---|---|
| Ceramic | 9 | 460–665 mm | 420–520 mm | 830–860 mm |
| Stone | 70 | 350–600 mm | 350–520 mm | 600–890 mm |
| Concrete | 2 | 400–440 mm | 400–440 mm | 850–875 mm |
The ceramic row excludes SHY-304H, whose 520 mm is body height. Ten ceramic pages are live in total.
Ceramic and vitreous china pedestals
Ceramic models start at 460 mm, so none are compact. Two construction types appear. The vitreous china 1004 is a one-piece body, with bowl and pedestal formed as one continuous piece. The NBK models are back-to-wall pedestals: their pages print the line "Fixing to wall with back".
The tapered rectangular 20-inch ceramic pedestal sink 1004 is the one ceramic page that publishes bowl figures. Its bowl interior is about 240 x 180 mm at the top, with section depths of 200 mm and 175 mm.
Stone covers every width band and the full height spread, from 600 mm to 890 mm. The design range runs from fluted columns to carved and rectangular bowls. Concrete is the outdoor option here, with only two sized models.
How to choose pedestal sink dimensions by project type
Match the band and height to the room before you match the design. These rules come straight from the size data above.
Powder rooms and tight spaces
Start in the compact band. SP1040 at 350 × 350 mm gives the smallest plan, and SP1045 at 380 × 380 mm is next. SP1040, at 350 mm deep, also projects least of any model in the range. If you want a wider basin but have little projection, compare SP1056 at 560 × 360 mm and SP1054 or SP1055 at 600 × 380 mm, which need a wall of 560–600 mm instead. Powder rooms usually need no storage, which is why a pedestal sink suits them.
Hotel guest bathrooms
Pick one standard-band model per room type and hold it across the property. Mixing an 830 mm NBK with an 850 mm stone model puts two rim lines in one building. Check the accessible rooms separately against the 865 mm figure and the knee clearance rule.
Multifamily and residential projects
Ask for the full spec drawing with waste height and supply positions for each model before first fix. Drawings that already print the body openings, such as 1001B and 1006, show how much room the column leaves for the trap and supplies. If residents want under-sink storage, compare pedestal and vanity footprints in our guide to standard bathroom sink sizes before you commit to pedestals.
Outdoor and garden washrooms
Concrete is the outdoor family. The fluted outdoor concrete pedestal sink C4005 stands 875 mm, above the 850 mm norm. C4006 is round at Ø440 × 850 mm. Both take the tap separately, so plan a wall or post for it.
Measurements to take on site before you order
A pedestal cannot be cut down later. Take these measurements first, then compare them with the drawing, not the size line alone.
- Clear wall width. Measure between finished surfaces, including any tile on side walls. Plumbing code sets a minimum distance from the lavatory centerline to a side wall or obstruction, so that clearance, not the basin width, usually sets the minimum run. Check the plumbing code edition and local amendments that apply to your project.
- Available projection. Measure from the finished wall to the nearest door swing or fixture. Compare it with the front-to-back figure, then add the clear space the plumbing code requires in front of the lavatory.
- Finished floor level. Rim height is measured from the finished floor. Note any tile, stone or underlay still to come.
- Baseboards and tile. Check where the column base meets the wall. Use the column footprint on the drawing to see whether the pedestal will fit flush.
- Existing plumbing. Note where the waste and supply leave the wall. Compare them with the openings on the drawing.
- Wall behind the basin. NBK models print "Fixing to wall with back". Confirm the wall build-up with your contractor before it is closed.
- Mirror and faucet line. Set both from the published rim height of the pedestal sink you choose.
The most common errors are reading the 520 mm of SHY-304H as a rim height and using the top plan as the floor footprint. Both show up only on the drawing.
Request a quote with model, size and quantity
Send us the model, size and quantity for each room type. Add your clear wall width, available projection and finish build-up, so we can confirm the drawing figures against your plans. Minimum order, samples and timing are confirmed in the written quotation per model. SANIKB replies within 12 business hours. Browse our stone pedestal sinks or pedestal basins in ceramic to build your shortlist.
Frequently asked questions
What is the standard height of a pedestal sink?
Pedestal sink rim height in the SANIKB range is 850 mm (33.5 in) floor to rim for 70 of 80 models. Ceramic NBK models print 830 mm or 845 mm, and the one-piece 1004 prints 860 mm. Outliers run from SP1003 at 600 mm to SP1031 at 890 mm. Hold one model per room type so every rim line matches.
What is the standard width of a pedestal sink?
Pedestal sink width has no single standard, but 57 of 81 sized SANIKB models fall between 401 and 520 mm (15.8–20.5 in). Compact models run 350–400 mm, and 8 wide models reach 550–665 mm. Measure the clear wall width between finished surfaces first, then choose from the band that fits.
How far off the wall should a pedestal sink be?
Pedestal sink projection equals its front-to-back depth, because the back sits against the finished wall. Across 81 sized SANIKB models that depth runs 350–520 mm (13.8–20.5 in), and most sit between 400 and 450 mm. SP1040 at 350 mm and SP1056 at 360 mm project least. Plumbing code also requires clear space in front of the lavatory, so check it before you fix the door swing.
Do sink pedestals come in different sizes?
Sink pedestals come in different sizes, and each column is matched to its own basin. The NBK-281L column is 315 mm deep at the floor under a 420 mm top. Several stone models are carved as one piece, and the one-piece ceramic 1004 forms bowl and column as one body. Order the pedestal with its basin, and confirm the column footprint on the drawing.
— Rokan, SANIKB