Freestanding Tub Sizes: What 148 Real Models Measure in Inches
Most freestanding tubs are 1500 or 1700 mm (59 or 67 in) long; 107 of 148 SANIKB models are 800 mm (31.5 in) wide.
Auf dieser Seite
Quick answer: Across 148 active SANIKB freestanding and back-to-wall models, 112 are offered at 66.9 in (1700 mm) long and 81 at 1500 mm (59.1 in) long. 117 of 148 models (about four in five) are offered at 1500 mm and/or 1700 mm, so a layout drawn around either length keeps most shapes open. 107 of 148 models are 800 mm (31.5 in) wide, and 65 of 148 have a 600 mm (23.6 in) outside height. A 1500 mm freestanding tub is 59 in long, not 60 in, and a 1700 mm tub is 67 in long, not 66 in.
Most freestanding tub sizes fall into two lengths: 59.1 in (1500 mm) and 66.9 in (1700 mm). Widths cluster at 750–800 mm (29.5–31.5 in), and outside heights at 580–610 mm (22.8–24.0 in). Across 148 active SANIKB freestanding and back-to-wall models, 112 are offered at 66.9 in (1700 mm) long and 81 at 1500 mm (59.1 in) long.
Those two lengths cover the standard bathroom. The edges of the range matter just as much for a project. Compact deep soakers start at 1200 mm (47.2 in), and oversized ovals reach 2090 mm (82.3 in).
Freestanding tub sizes at a glance: find the right size band
Start with the length band, because length decides whether the tub fits the room at all. The table groups our catalog into four bands.
| Size band | Length | Models offering it (of 148) | Example models |
|---|---|---|---|
| Compact | 1400 mm (55.1 in) and under | 6 models under 1400 mm, 6 at 1400 mm | D-8202, D-8330, FT065, FT014 |
| Standard short | Over 1400 mm, up to 1600 mm (63.0 in) | 81 at 1500 mm, 19 at 1600 mm, 2 at 1480 mm, 2 at 1524 mm | D-8505, D-8371B, D-8383, FT045 |
| Standard long | Over 1600 mm, under 1800 mm (70.9 in) | 112 at 1700 mm, 3 at 1680 mm, 2 at 1780 mm | D-8353, FT046, FT023, D-8092, D-8025 |
| Large | 1800 mm (70.9 in) and up | 14 at 1800 mm, 2 over 1800 mm | D-8393, D-8009, D-8008 |
A model can sit in more than one band, because 92 of 148 models come in two or more lengths. That is why the counts add up to more than 148. Counts show the most common lengths only; in-between lengths such as 1550, 1640, 1750 and 1775 mm also exist.
For most bathrooms, the real decision is 59 in or 67 in. 117 of 148 models (about four in five) are offered at 1500 mm and/or 1700 mm, so a layout drawn around either length keeps most shapes open. Round tubs and the shortest compact soakers are the main exceptions.
How 148 real models split by length
The table below counts every model that offers each length. The denominator is always 148 active freestanding and back-to-wall models. Across them we list 263 length options in total.
| Length (mm) | Length (in) | Models offering this length |
|---|---|---|
| 1700 | 66.9 | 112 of 148 |
| 1500 | 59.1 | 81 of 148 |
| 1600 | 63.0 | 19 of 148 |
| 1800 | 70.9 | 14 of 148 |
| 1400 | 55.1 | 6 of 148 |
| 1300 | 51.2 | 5 of 148 |
| 1680 | 66.1 | 3 of 148 |
| 1480 | 58.3 | 2 of 148 |
| 1780 | 70.1 | 2 of 148 |
| 1524 | 60.0 | 2 of 148 |
First, the 1600 mm (63.0 in) length is a real option for a tight room, with 19 models. Second, only 2 of 148 models are a true 1524 mm (60.0 in) length. If your plan says "60 in tub", it almost certainly means a 1500 mm (59.1 in) shell.
Use this table when you set a size for a repeated room type. If you pick 1700 mm, you can still switch styles late in design. If you pick 1480 mm or 1780 mm, you are tied to a handful of models.
Width and outside height: the other two freestanding tub dimensions
Length gets the attention, but width decides walkway space beside the tub. Outside height decides how high the rim sits for stepping in. All sizes in this guide are exterior, overall dimensions, listed as L × W × H.
| Most common widths | Models (of 148) | Most common outside heights | Models (of 148) |
|---|---|---|---|
| 800 mm (31.5 in) | 107 | 600 mm (23.6 in) | 65 |
| 750 mm (29.5 in) | 25 | 580 mm (22.8 in) | 27 |
| 780 mm (30.7 in) | 8 | 610 mm (24.0 in) | 10 |
| 790 mm (31.1 in) | 4 | 590 mm (23.2 in) | 9 |
| 850 mm (33.5 in) | 4 | 700 mm (27.6 in) | 7 |
| 700 mm (27.6 in) | 3 | 650 mm (25.6 in) | 6 |
| 730 mm (28.7 in) | 3 | 680 mm (26.8 in) | 5 |
Each row lists one width and one height ranked by count; the two are not a paired size.
107 of 148 models are 800 mm (31.5 in) wide, and 65 of 148 have a 600 mm (23.6 in) outside height. Width across all models runs 690–1500 mm (27.2–59.1 in). The widest figures belong to round and square tubs, not to long ovals.
Outside height runs 550–890 mm (21.7–35.0 in). Only 21 of 148 models have a height option of 700 mm (27.6 in) or more. Those are deep soaking tubs and high-back slippers. Outside height is not water depth or soaking depth, so check our guide to bathtub soaking depth before you compare tubs on how deep they fill.
If the room is narrow, the 750 mm (29.5 in) width is the number to ask for. It is a real step down from the common 800 mm shell. The narrow models in this guide are D-8383, FT045/FT046 and the shorter FT013/FT014 sizes.
Read metric sizes right: 1500 mm is 59 in, not 60 in
Factory tubs are designed in millimeters, and inch sizes are conversions. Rounding errors cause real fit problems. A plan that reserves 60 in for a 1500 mm tub is fine. A plan that reserves 66 in for a 1700 mm tub is not, because the shell is 66.93 in long.
| Factory length (mm) | Exact inches | Nearest whole inch |
|---|---|---|
| 1200 | 47.24 | 47 in |
| 1300 | 51.18 | 51 in |
| 1400 | 55.12 | 55 in |
| 1500 | 59.06 | 59 in |
| 1524 | 60.00 | 60 in |
| 1600 | 62.99 | 63 in |
| 1700 | 66.93 | 67 in |
| 1800 | 70.87 | 71 in |
| 1830 | 72.05 | 72 in |
| 1890 | 74.41 | 74 in |
| 2090 | 82.28 | 82 in |
A 1500 mm freestanding tub is 59 in long, not 60 in, and a 1700 mm tub is 67 in long, not 66 in. Write the millimeter figure on your schedule and treat the inch figure as a label. Your plumber and tile setter should work from the metric drawing.
One more check: a 58 in or 66 in label is a different shell, not a rounded 1500 or 1700 mm tub. D-8383 is 1480 mm and 1680 mm long, about 20 mm shorter than the standard sizes.
Standard freestanding tub size for repeated room types
For hotels and multifamily projects, you want one size that repeats across many rooms. Pick the length first, then the width, then the style. That order keeps the most models available at each step.
- Full-size bathroom: 66.9 in (1700 mm) long and 800 mm (31.5 in) wide. This is the most offered combination in the catalog.
- Standard bathroom, shorter room: 1500 mm (59.1 in) long. 81 of 148 models offer it.
- Narrow room: 750 mm (29.5 in) wide. 25 of 148 models offer that width, but in some families only the shorter sizes are 750 mm wide, so check each size.
- Short room: 1300–1400 mm (51.2–55.1 in) compact deep soakers.
The standard freestanding tub size is a planning default, not a rule. If a room type has a window, a radiator or a door near the tub, size it from the measured room. Then check the chosen model on its drawing, not on a nominal size.
If the tub will stand inside a three-wall recess, compare freestanding and built-in options first. Our freestanding vs alcove tub guide covers that choice.
One shape, several lengths: size families that cover a whole project
A size family is one tub shape made in several lengths. It lets a project use the same look in a small studio and a large suite. 92 of 148 models come in two or more lengths, so ask for the family drawing, not a single size.
| Family | Style | Lengths | Widths |
|---|---|---|---|
| FT060–FT065 | Hammock-style single slipper | 51 / 55 / 59 / 62 / 67 / 70 in | 29.9 / 31.5 / 33.5 in |
| FT013/FT014/FT023/FT024 | Rectangular, double ended | 55 / 59 / 67 / 71 in | 29.5 / 31.5 in |
| D-8012 | Oval, double ended | 58 / 61 / 65 / 70 in | 31.3 / 31.5 / 31.7 in |
| D-8371B | Oval, double ended, quilted | 59 / 63 / 67 in | 31.5 in |
Hammock-style slipper in six sizes
The hammock-style slipper freestanding tub in six sizes (FT060–FT065) runs from 1300 to 1770 mm long. FT065 is 1300 × 800 × 640 mm (51 × 31.5 × 25.2 in). FT064 is 1400 × 800 × 680 mm (55 × 31.5 × 26.8 in).
FT063 is 1500 × 800 × 680 mm (59 × 31.5 × 26.8 in). FT061 is 1570 × 760 × 680 mm (62 × 29.9 × 26.8 in). The 67 in and 70 in sizes complete the family, with heights up to 30.3 in across the range. Confirm each size's height on the family drawing.
Rectangular two-tone tub in four sizes
The black rectangular freestanding tub with white interior (FT013/FT014/FT023/FT024) changes width with length. FT014 is 1400 × 750 × 590 mm (55 × 29.5 × 23.2 in). FT013 is 1500 × 750 × 590 mm (59 × 29.5 × 23.2 in).
FT023 is 1700 × 800 × 590 mm (67 × 31.5 × 23.2 in). FT024 is 1800 × 800 × 590 mm (71 × 31.5 × 23.2 in). The rim height stays at 590 mm across all four. That keeps rim lines level when rooms of different sizes sit side by side.
Double-ended oval in four sizes
The black two-tone double-ended freestanding tub (D-8012) uses lengths that sit between the usual steps. D-8012-150 is 1485 × 805 × 580 mm (58 × 31.7 × 22.8 in). D-8012-155 is 1550 × 795 × 580 mm (61 × 31.3 × 22.8 in).
D-8012-165 is 1640 × 795 × 580 mm (65 × 31.3 × 22.8 in). D-8012-178 is 1775 × 800 × 580 mm (70 × 31.5 × 22.8 in). Those in-between lengths help when a room is a little short of a full 1700 mm tub.
Double ended freestanding tub sizes and the other backrest styles
Backrest style changes how much of the length you can use. A double ended tub has two sloped ends, so either end works as a backrest. A single ended tub puts the slope at one end and the drain at the other. Styles across the 148 models break down as follows.
| Style or shape | Models (of 148) |
|---|---|
| Double ended | 108 |
| Single ended | 37 |
| Oval shape | 84 |
| Deep soaking | 34 |
| Rectangular shape | 26 |
| Slipper | 21 |
| Rounded rectangle shape | 19 |
| Plinth base | 14 |
| Double slipper | 12 |
| D shape | 9 |
The double ended freestanding tub is the default style, at 108 of 148 models. The oval double-ended models below show how the same style spans the length bands.
- Wave-textured oval freestanding bathtub (D-8505): 1500 / 1700 × 780 × 600 mm (59 / 67 × 30.7 × 23.6 in).
- Compact gloss white oval tub, 750 mm wide (D-8383): 1480 / 1680 × 750 × 580 mm (58 / 66 × 29.5 × 22.8 in). The drain is centered.
- Burgundy quilted oval freestanding bathtub (D-8371B): 1500 / 1600 / 1700 × 800 × 610 mm (59 / 63 / 67 × 31.5 × 24.0 in).
- D-8393: 1800 × 840 × 600 mm (71 × 33.1 × 23.6 in), one size.
Single ended styles suit a shorter room. You lose the second backrest, but the drain end gives a natural spot for a floor-standing filler. Pick double ended when two people will share the tub or when the filler sits at the side.
Slipper and double slipper tubs: plan for the tall end
Slipper tubs raise one or both ends well above a standard rim. That height changes sightlines, window sills and how close a wall shelf can sit. Check the tallest point on the drawing, not the average rim height.
The sweeping high-back slipper freestanding tub (D-8092) rises to 800 mm (31.5 in) at the back. It is made at 1700 × 800 × 800 mm (67 × 31.5 × 31.5 in). A second size is 1800 × 800 × 800 mm (71 × 31.5 × 31.5 in). The drain sits at the low foot end, and the drawing shows a 470 mm (18.5 in) inner depth.
The black rolled-rim double slipper freestanding tub (D-8025) raises both ends. D-8025-175 is 1750 × 830 × 885 mm (69 × 32.7 × 34.8 in). That is one of the tallest outside heights in the range, which tops out at 890 mm (35.0 in).
Before you approve a slipper tub, check two things on site:
- The tall end clears any window sill or niche behind it.
- The filler spout reaches over the low side, not the tall end.
Browse more shapes in our slipper tubs collection.
Rectangular and round freestanding tubs: different footprints, different checks
These shapes fill their footprint differently from ovals. A rectangle uses its corners, so it needs the full L × W rectangle clear. An oval leaves the corners open, which helps in a tight room.
Rectangular shells
26 of 148 models are rectangular, and 19 more are rounded rectangles. The FT013 family above is a sharp rectangle. D-8353, a back-to-wall tub, is a rounded rectangle at 1500 / 1700 × 800 × 600 mm (59 / 67 × 31.5 × 23.6 in).
Round tubs
Round tubs need a square floor area, not a long one. Width across the catalog reaches 1380–1500 mm only on round and square tubs. Only 2 of 148 models are round, and 1 is square.
The round cylinder freestanding tub on a recessed plinth (D-8028) is 1400 × 1400 × 600 mm (55.1 × 55.1 × 23.6 in). Its drain sits at the center of the circle, 700 mm from the outer edge. The round freestanding tub with deck-mount faucet ledge (D-8138) is 1380 × 1380 × 580 mm (54.3 × 54.3 × 22.8 in), with a center drain.
A round tub suits a square room or a corner of open space in a suite. It does not suit a long, narrow bathroom.
Compact deep soaking tubs for small bathrooms
Compact deep soakers trade length for height. A compact soaking tub fits a short room and still gives a full bath in a seated position. Only 6 of 148 models offer a length under 1400 mm (55 in).
The compact deep soaking freestanding tub on plinth base (D-8202) is the shortest. Its short size is 1200 × 750 × 700 mm (47 × 29.5 × 27.6 in). The longer size is 1300 × 750 × 700 mm (51 × 29.5 × 27.6 in).
D-8330 is a compact rounded rectangle built tall rather than long. It comes at 1300 × 800 × 700 mm (51 × 31.5 × 27.6 in) and 1400 × 800 × 700 mm (55 × 31.5 × 27.6 in). Its inner depths are 550 and 570 mm (21.7 and 22.4 in).
A 700 mm (27.6 in) rim is high to step over. Plan a grab point or a stable floor surface beside the tub, and check it with the end user. For the full range, see our small bathtubs collection.
Oversized tubs: 71 in and longer
Large tubs need more than floor area. They also need a delivery path from the truck to the bathroom. Measure doors, stair turns and the elevator before you confirm a size over 1800 mm.
- D-8393 is 1800 × 840 × 600 mm (71 × 33.1 × 23.6 in).
- The pebble-shaped double-ended oval freestanding tub (D-8009) is 1830 × 870 × 580 mm (72 × 34.3 × 22.8 in).
- The large egg-shaped oval freestanding bathtub with wide rim (D-8008) comes in two sizes. D-8008-189 is 1890 × 930 × 550 mm (74 × 36.6 × 21.7 in), and D-8008-209 is 2090 × 1000 × 580 mm (82 × 39.4 × 22.8 in).
Only 2 of 148 models offer a length over 1800 mm (71 in). Larger tubs also take longer to fill, so confirm the hot water supply with your plumbing engineer. D-8008's listed 930 and 1000 mm widths already include its broad rim.
Back-to-wall freestanding tubs when four-side clearance is not possible
A back-to-wall tub puts one long side flat against a wall. It sits between an alcove tub and a full freestanding bathtub: open on three sides, with no gap behind. 14 of 148 models are back-to-wall freestanding tubs.
- Narrow D-shape back-to-wall bathtub, 29.5 in wide (FT045/FT046): FT045 is 1500 × 750 × 580 mm (59 × 29.5 × 22.8 in). FT046 is 1700 × 750 × 580 mm (67 × 29.5 × 22.8 in).
- D-8353: 1500 / 1700 × 800 × 600 mm (59 / 67 × 31.5 × 23.6 in), on a stepped plinth base.
D-8353 sets its bowl rim 90 mm in from the back edge. That leaves a back deck with three tap holes for a deck-mounted tap set. Whether a tap set ships with the tub is settled at quotation. D-8138 also carries its faucet on a rim ledge. Every other model named in this guide has no tap holes and takes a floor-standing or wall-mounted filler. Among the 14 back-to-wall models, 8 are made for deck-mounted taps, so confirm the faucet mount before you swap one in.
All 14 back-to-wall models come at 1500 and/or 1700 mm, so the floor length can stay the same. The filler, drain position and wall finish still change, so recheck them on the back-to-wall drawing.
Freestanding tub clearance: how much space to plan around the tub
Space requirements around a tub are set by local code, your inspector and the approved drawing. What you can do is check the same points on every layout.
- Footprint: tape the full exterior L × W on the floor. Exterior size includes the rim.
- Cleaning access: leave room to reach behind and around the tub, or choose back-to-wall.
- Filler position: a floor-standing filler needs its own spot at the drain end or the side.
- Drain position: confirm center or end drain on the drawing before the floor is poured.
- Overflow: confirm the overflow position on the approved drawing, and confirm at quotation whether a drain and overflow fitting is supplied.
- Door and fixtures: check door swing, toilet and vanity spacing against local code.
How much space a tub needs also depends on use. A tub used for daily bathing needs a wider path than a feature tub in an open space.
The drain position is the most common late change. D-8383 and the round tubs drain at the center. D-8092 drains at its low foot end, and D-8330 normally takes its faucet at the drain end. Rough-in follows the drawing of the exact model and size.
Materials check: all 148 models in this guide are acrylic. None are cast iron, natural stone, solid surface, marble or fiberglass, and none are clawfoot tubs on feet, so every size table here compares like with like. Each model named in this guide is cUPC certified, as its product description states.
If you are also weighing materials, read our cast iron vs acrylic bathtub comparison.
How to choose the right bathtub size for your bathroom layout
Different projects repeat different bathroom sizes, so they need different freestanding tub sizes. Use the table to set a starting size, then confirm it on the drawing of the chosen model.
| Project type | Starting size | Models to review |
|---|---|---|
| Hotel standard room | 1500 or 1700 mm, 800 mm wide | D-8371B, D-8353, FT023 |
| Hotel suite | 1750 mm and up | D-8393, D-8009, D-8008, D-8025 |
| Multifamily, narrow bathroom | 1500 or 1700 mm, 750 mm wide | D-8383, FT045/FT046, FT013 |
| Small bathrooms and studios | 1200–1400 mm, deep soaking | D-8202, D-8330, FT065 |
| Renovation without rear clearance | Back-to-wall, 1500 or 1700 mm | D-8353, FT045/FT046 |
| Square room or open-plan suite | Round, 1380–1400 mm | D-8028, D-8138 |
For a mixed project, pick one size family and assign lengths by room. FT060–FT065 and FT013/FT014/FT023/FT024 suit this best. One shape across the building keeps the look the same and simplifies the order.
Common sizing mistakes to avoid
- Rounding 1700 mm to 66 in. The shell is 66.93 in. Reserve the metric length, not the rounded label.
- Assuming every tub is 800 mm wide. Widths run from 690 mm to 1500 mm across 148 models. Check the width of each size in a family.
- Ordering a length the family does not make. D-8505 comes only at 1500 and 1700 mm. Pick a model that offers the length you need.
- Using outside height as water depth. They are different numbers. Water depth runs to the overflow, so check the overflow height on the drawing.
- Forgetting the filler. Most rims here have no tap holes. Plan the floor-standing or wall-mounted filler with the tub.
- Skipping the overflow check. Confirm the overflow drain position on the drawing before plumbing rough-in.
- Ignoring the tall end. Slipper backs in this range reach up to 890 mm (35.0 in). Check sills and sightlines against the tallest point on the drawing.
Ready to set sizes for your project? Send us the model, the size in millimeters and the quantity for each room type, and we will return drawings with a written quotation. Order minimums and samples are confirmed in the written quotation per model. Browse the full freestanding bathtubs range to build your list.
Frequently asked questions
What is the standard size for a freestanding tub?
The most common freestanding tub size is 66.9 in (1700 mm) long and 800 mm (31.5 in) wide. Across 148 active SANIKB models, 112 offer the 1700 mm length and 107 the 800 mm width. The 1500 mm (59.1 in) length comes next, offered by 81 models. Set 1700 mm for a full-size bathroom and 1500 mm for a shorter room, then confirm on the drawing.
Is a 54 inch freestanding tub too small?
A 54 inch freestanding tub suits a seated soak in a compact room, not a full recline. Lengths of 1300–1400 mm (51–55 in) include FT065, FT064 and D-8330. D-8330 reaches 1400 × 800 × 700 mm (55 × 31.5 × 27.6 in), with inner depths of 550 and 570 mm. Only 6 of 148 models offer a length under 1400 mm. Choose one when the wall is short and the user prefers depth over length.
How much space do you need around a freestanding tub?
Freestanding tub clearance is set by local code, your inspector and the approved drawing, so no single figure applies everywhere. Tape the full exterior footprint on the floor first. Then check cleaning access, filler position, drain position, door swing and toilet spacing. If the rear gap is not possible, a back-to-wall model at 1500 or 1700 mm keeps the same lengths.
What is the best freestanding tub for two people?
A double ended freestanding tub suits two people best, because both ends are shaped as backrests. Double ended styles cover 108 of 148 SANIKB models. For two adults, look at the larger sizes: D-8009 at 1830 mm (72 in), D-8008 at 1890 or 2090 mm, or the D-8025 double slipper at 1750 mm. Check the delivery path before you commit to an oversized tub.
— Rokan, SANIKB