مرحاض معلّق على الجدار بتدفق دوّامي بطول 590 مم، مخرج مصيدة P بقياس 180 مم

Swirl flush is the defining feature of the FT-150, a 23-inch swirl flush wall-hung toilet. The catalog calls the flush super-swirling, and this page writes it as swirl. The bowl measures 590 mm long and 360 mm wide, or 23.2 by 14.2 in. A buyer sorting a range by flush type would place FT-150 with the swirl models, separate from washdown and dual-jet codes. Ceramic is the listed material, and wall-hung installation is the only mounting printed.

FT-150 prints 3 dimensions in length × width × height order. Length reads 590 mm, or 23.2 in, the figure behind the 23-inch label used on this page. Width is 360 mm (14.2 in), and height is 340 mm (13.4 in). The single FT-150 SKU carries this one printed size, quoted exactly as the catalog lists it. Verify against the official technical drawing before fabrication.

Outlet data for the FT-150 is the printed line P-trap 180mm. That line gives the rear outlet height, so the wall drain is the plumbing connection to plan, not a floor flange. Hold the measured drain height against 180 mm and confirm against the model spec sheet. Certification documents for the FT-150 are matched to the destination market at quotation. The swirl flush, the 180 mm outlet and the 590 mm length are the 3 data points to quote.