哑光白收窄椭圆独立式浴缸，三种长度，59-67英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8371是一款哑光白亚克力椭圆独立式浴缸，两侧向内收窄至较小的平底，配纤薄缸沿和中置排水口。三种长度共用同一宽度和高度：D-8371-150，1500 x 800 x 610 mm（59 x 31.5 x 24.0英寸）；D-8371-160，1600 x 800 x 610 mm（63 x 31.5 x 24.0英寸）；D-8371-170，1700 x 800 x 610 mm（67 x 31.5 x 24.0英寸）。溢水口位于一侧长边中段，缸沿不开水龙头孔，因此可搭配落地式或壁挂式浴缸水龙头。D-8371通过cUPC认证，报价单在12个工作小时内发出。
可与其他独立式浴缸对比选择。
三种长度便于酒店、公寓和精装房项目按户型选配，适合工程批量采购，也可为Amazon、Wayfair等电商平台卖家供货。
More in 独立式浴缸
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8371
Every option below is a produced configuration with its own SKU. 3 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8371-150 | 59" x 31" |
| D-8371-160 | 63" x 31" |
| D-8371-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 3 sizes
Size & spec comparison
| 59" x 31"D-8371-150 | 63" x 31"D-8371-160 | 67" x 31"D-8371-170 | |
|---|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 24.0″ 1500 × 800 × 610 mm | 63″ × 31.5″ × 24.0″ 1600 × 800 × 610 mm | 67″ × 31.5″ × 24.0″ 1700 × 800 × 610 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Profile
Oval body tapering to a smaller flat base
D-8371 narrows from its rim down to a flat base that is smaller than the top outline. Both ends are shaped for reclining, and the drain is at the center of the tub floor.
Inward-sloping sides
The sides of D-8371 lean inward on the way down, so the base takes up less floor than the 800 mm (31.5 in) width at the rim.
Overflow on a long side
The D-8371 overflow is placed at the middle of one long side rather than at an end. Decide which long side faces the room when the layout is drawn, since the overflow shows on that side.
Other tapered shapes are in the freestanding bathtub range.
Fit & Plumbing
1500, 1600 or 1700 mm on one 800 mm width
Three D-8371 lengths let one model cover a compact bathroom and a larger suite: 1500 mm (59 in), 1600 mm (63 in) and 1700 mm (67 in). Width is 800 mm (31.5 in) and height 610 mm (24.0 in) on every size.
- D-8371-150
- 59" × 31.5" × 24.0" (1500 × 800 × 610 mm)
- D-8371-160
- 63" × 31.5" × 24.0" (1600 × 800 × 610 mm)
- D-8371-170
- 67" × 31.5" × 24.0" (1700 × 800 × 610 mm)
- Faucet Mount
- Floor-standing or wall-mounted filler
The middle 1600 mm (63 in) size fits rooms where a 1700 mm tub will not clear a door or vanity but a 1500 mm tub leaves a gap. The drain stays at the center on all three D-8371 lengths.
Confirm the drain and overflow positions for the chosen D-8371 length on the approved drawing.
Material & Color
Matte white pure acrylic, white as standard
D-8371 is made from pure acrylic sheet with a matte surface, and white is its standard color.
White
All-white as standard
D-8371 is made in all-white as standard. The two-tone version with a burgundy exterior over a white interior is not a standard color; any color other than white is confirmed at quotation.
If an order mixes the three D-8371 lengths, approve one matte sample and hold it as the finish reference for all of them.
Colors other than white are agreed at quotation, before the sample is made.
Compliance
cUPC certification for D-8371
Name D-8371-150, D-8371-160 or D-8371-170 on the document request so the paperwork matches the lengths shipped.
D-8371 is cUPC certified in all three sizes. Request the current certificate details for the SKUs on your order before the submittal goes out.
Tell us the destination market when you enquire, and a written reply follows within 12 business hours.
Procurement
One quotation for three D-8371 lengths
SANIKB manufactures D-8371 and quotes the 1500, 1600 and 1700 mm sizes as separate lines.
- Sizes
- 1500 / 1600 / 1700 mm
- Standard Lead Time
- 30-45 days after sample approval
Standard lead time on D-8371 is 30-45 days after sample approval. A project with mixed room sizes can take all three lengths on one quotation; list each quantity separately.
Include these details with the RFQ
- Quantity per length: D-8371-150, D-8371-160, D-8371-170
- Exterior color (white is standard)
- Destination market and port
- Floor-standing or wall-mounted filler planned
- Drain and overflow fittings, if needed
- Shipping window
Shipping dates for D-8371 are fixed on the quotation, not before.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request