哑光白矩形独立式浴缸，圆角，59英寸和67英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8375 是一款白色亚克力哑光矩形独立式浴缸。平面转角圆润，侧壁向较小的平底收窄，顶部是15 mm 的缸沿。双头设计，排水口位于缸底中心，溢水口位于一侧长边中段。
可选 D-8375-150，1500 x 800 x 600 mm（59 x 31.5 x 23.6英寸），或更长的 D-8375-170，1700 x 800 x 600 mm（67 x 31.5 x 23.6英寸）。缸沿没有水龙头孔，需配落地式或壁挂式水龙头，两种尺寸均通过 cUPC 认证。更多造型请浏览独立式浴缸系列。
哑光矩形款适合精装房和住宅开发项目，支持工程批量采购；也可为 Amazon、Wayfair 等电商平台卖家供货。
More in 独立式浴缸
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8375
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8375-150 | 59" x 31" |
| D-8375-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 31"D-8375-150 | 67" x 31"D-8375-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 23.6″ 1500 × 800 × 600 mm | 67″ × 31.5″ × 23.6″ 1700 × 800 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Layout
Rounded rectangle with a center drain
D-8375 has a rounded-rectangle plan that is symmetric end to end, with no flat side. Walls taper inward to a smaller base, and the drain is placed at the center.
Backrest at either end
D-8375 is double-ended, so the bather can recline at either end. Inner depth on the drawing is 470 mm at the middle and 450 mm toward the ends.
15 mm rim, overflow on the long side
The drawing gives the rim as 15 mm (0.6 in). The overflow sits midway along a long side, leaving both ends free of fittings.
Other straight-edged freestanding shapes are in the freestanding bathtub collection.
Fit & Footprint
800 mm wide in 1500 and 1700 mm lengths
D-8375-150 covers 59 x 31.5 x 23.6 inches (1500 x 800 x 600 mm), and D-8375-170 extends the same section to 67 x 31.5 x 23.6 inches (1700 x 800 x 600 mm).
- D-8375-150
- 59" x 31.5" x 23.6" (1500 x 800 x 600 mm)
- D-8375-170
- 67" x 31.5" x 23.6" (1700 x 800 x 600 mm)
- Inner Depth (as drawn)
- 17.7" at the ends, 18.5" at center (450 / 470 mm)
- Faucet Mounting
- Floor-standing or wall; no rim tap holes
On the 1500 mm drawing the length is dimensioned as 260 + 980 + 260 mm and the 800 mm width as 150 + 500 + 150 mm, with the drain drawn at a 45 mm radius. Use the drawing for the 1700 mm size to set its own drain point.
Set the floor waste for D-8375 to the approved drawing of the size being ordered.
Construction & Finish
Matte white acrylic
D-8375 is formed from pure acrylic sheet and finished in matte white.
White
Low-sheen exterior
A matte surface reads softer than gloss beside glazed ceramic fittings. If the bathroom mixes finishes, approve D-8375 on a sample next to the other pieces.
Because the sides taper to a smaller base, the footprint on the floor is less than the 800 mm top width. Level and finish the floor under D-8375 before it is placed.
The approved D-8375 sample sets the finish standard for the order.
Compliance
cUPC certified D-8375
Quote D-8375-150 or D-8375-170 when asking for certificates.
D-8375 is cUPC certified in both sizes. Request the certificate number and validity against the SKU going into the submittal.
Include the destination market and required documents in your enquiry; written answers are sent within 12 business hours.
Procurement
Placing an order for D-8375
D-8375 is quoted by SKU, and production follows 30-45 days after sample approval.
- Size SKUs
- D-8375-150, D-8375-170
- Standard Lead Time
- 30-45 days after sample approval
Agree surface protection for the matte shell of D-8375, together with corner guards, in the packing specification.
Include these details with the RFQ
- Quantities of D-8375-150 and D-8375-170
- Destination port
- Filler: floor-standing or wall-mounted
- Carton marking or private label
- Shipping window
Final D-8375 lead time appears on the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request