外扩矩形独立式浴缸，方角，59至67英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8013 是一款外扩矩形独立式浴缸，四个转角为方角，缸壁从平底向外扩张至纤薄平整的缸沿，侧面看呈倒梯形。白色亚克力缸体为双头设计，排水口居中。
这款外扩缸体提供三种长度，宽度同为800 mm：D-8013-150，1500 x 800 x 600 mm（59 x 31.5 x 23.6英寸）；D-8013-160，1600 x 800 x 600 mm（63 x 31.5 x 23.6英寸）；D-8013-170，1700 x 800 x 600 mm（67 x 31.5 x 23.6英寸）。缸沿没有水龙头孔，需配落地式或壁挂式水龙头，并通过 cUPC 认证。详见独立式浴缸系列。
三种长度同一宽度，便于酒店和公寓项目统一选型与工程批量采购，也可为 Amazon、Wayfair 等电商平台卖家供货。
More in 独立式浴缸
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8013
Every option below is a produced configuration with its own SKU. 3 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8013-150 | 59" x 31" |
| D-8013-160 | 63" x 31" |
| D-8013-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 3 sizes
Size & spec comparison
| 59" x 31"D-8013-150 | 63" x 31"D-8013-160 | 67" x 31"D-8013-170 | |
|---|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 23.6″ 1500 × 800 × 600 mm | 63″ × 31.5″ × 23.6″ 1600 × 800 × 600 mm | 67″ × 31.5″ × 23.6″ 1700 × 800 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Rim
Square corners over flared walls
D-8013 is drawn as a rectangle with four square corners, symmetric along both axes. From the side, each end flares outward so the rim outline is larger than the base.
Inverted trapezoid
The walls lean out as they rise, which keeps the floor footprint smaller than the 800 mm top width. The rim is thin and flat.
Drain on the center line
The drain is drawn at half the length from each end and 400 mm (15.7 in) from the side, which puts it at the center of the floor on all three sizes.
Compare other rectangular shapes in the freestanding bathtub range.
Fit & Footprint
1500, 1600 and 1700 mm, all 800 mm wide
All three D-8013 sizes are 800 mm (31.5 in) wide and 600 mm (23.6 in) high; lengths are 59, 63 and 67 inches.
- D-8013-150
- 59" x 31.5" x 23.6" (1500 x 800 x 600 mm)
- D-8013-160
- 63" x 31.5" x 23.6" (1600 x 800 x 600 mm)
- D-8013-170
- 67" x 31.5" x 23.6" (1700 x 800 x 600 mm)
- Inner Depth (as drawn)
- 18.5" and 18.9" (470 / 480 mm)
The drawing places the drain 750, 800 or 850 mm from the end for the 1500, 1600 and 1700 mm sizes. The rim has no tap holes, so plan a floor-standing or wall-mounted filler at the layout stage.
Check the D-8013 drain set-out against the approved drawing of the length ordered.
Construction & Finish
White acrylic, thin flat rim
The flared D-8013 shell is made from pure acrylic sheet in white.
White
Sheen set by sample
D-8013 is made in white, and its gloss level is set on the pre-production sample before the run starts.
The base is flat and sits directly on the floor with no plinth. Level the floor so the thin rim runs true against surrounding tile lines.
Keep the signed-off D-8013 sample as the finish benchmark.
Compliance
D-8013 cUPC certification
Document requests should name the D-8013 SKU for the length being shipped.
D-8013-150, D-8013-160 and D-8013-170 are cUPC certified. For submittals, request the certificate number with its validity.
Share the destination market and document needs when enquiring; SANIKB issues a written reply for D-8013 within 12 business hours.
Procurement
D-8013 quotation
D-8013 is quoted by length, and production is 30-45 days after sample approval.
- Size SKUs
- D-8013-150, D-8013-160, D-8013-170
- Standard Lead Time
- 30-45 days after sample approval
Square corners are the most exposed points in a carton, so ask for guards on all four corners of D-8013.
Include these details with the RFQ
- Quantities per length for D-8013
- Port of discharge and market
- Floor-standing mixer or wall spout
- Branding on cartons
- Shipping timeframe
Expect D-8013 lead time to be confirmed with the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request