平沿亚克力嵌入式浴缸，带升高斜靠背，60 x 32英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
这款白色亚克力嵌入式浴缸采用矩形平缸沿和圆角内缸体。一端做出升高的斜靠背，排水口在对侧。外形尺寸为1524 × 810 × 497 mm（60 × 31.9 × 19.6英寸）。无一体式前裙板，周边台面、支撑和前部围封请按经确认的安装图纸规划。
缸口开孔为1360 × 633 mm（53.5 × 24.9英寸），图纸给出的缸深为415 mm（16.3英寸）。排水口为Ø55 mm，位于宽度中线上，距排水端250 mm（9.8英寸）。浴缸通过 cUPC 认证。询价时请确认水龙头安装方式、排水与溢流配件、订购数量和交期。SANIKB 在12个工作小时内回复。请见完整的嵌入式浴缸系列。
适合住宅开发、公寓等工程批量采购，并可为 Amazon、Wayfair 等电商平台卖家供货。
More in 嵌入式浴缸
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of AA6032
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Layout
Flat-rim drop-in tub with a raised sloped backrest
The outer rim is rectangular, with a rounded inner basin and one raised, sloped backrest. The drain is at the opposite end.
Raised lounge end
The backrest rises above the flat rim at one end. The tub is single-ended, with the drain at the other end.
Flat rim, no integral apron
The rim runs around the basin, and there is no finished front apron below it. Plan the surrounding deck and front enclosure with the approved installation drawing.
Compare other sizes and layouts in the SANIKB drop-in bathtub collection.
Fit & Dimensions
1524 x 810 mm overall, 1360 x 633 mm basin opening
Overall dimensions are 1524 × 810 × 497 mm (60 × 31.9 × 19.6 in), with the maximum height at the raised backrest. The basin opening is 1360 × 633 mm, and the drawing gives a basin depth of 415 mm.
- Overall Size
- 60" × 31.9" × 19.6" (1524 × 810 × 497 mm)
- Basin Opening
- 53.5" × 24.9" (1360 × 633 mm)
- Basin Depth
- 415 mm (16.3 in), as shown on the drawing
- Rim Detail
- 45 mm (1-3/4 in), as marked on the side view
- Drain
- Ø55 mm on the width centerline, 250 mm (9.8 in) from the end
- Drain Centerline
- 406 mm (16 in) from the side, as marked
- Overflow
- Ø60 mm opening; center 76 mm (3 in) below the rim
Use the dimensions for layout planning; confirm the cutout, support and drain/overflow connections against the approved installation drawing before the platform is built.
The supplied drawing shows one drain layout. Confirm the required orientation at quotation.
Material & Finish
White acrylic shell
The tub is made from acrylic with a white finish.
White
White finish for the bathroom layout
Match the surrounding deck and front enclosure to the room finish while keeping the tub dimensions and connections in the installation plan.
Confirm the faucet position and mounting method with the installation drawing before the plumbing is set out.
Specify the drain and overflow fittings required for the project; the included fitting scope is confirmed at quotation.
Record the exact flat-rim configuration and dimensions in the order.
Compliance
cUPC-certified acrylic bathtub
Request the certificate and approved installation drawing for the flat-rim product and keep them with the project specification.
This flat-rim acrylic bathtub is cUPC certified. Request the certificate documents against the exact product on the order.
Send the destination market and any submittal requirements with the inquiry so the document set can be checked for the project.
Procurement
Ordering the flat-rim drop-in bathtub
Specify the flat-rim configuration, 1524 × 810 × 497 mm overall dimensions and the required quantity. Order quantity and lead time are confirmed at quotation.
- Order Quantity
- Confirm at quotation
- Lead Time
- Confirm at quotation
- Quote Reply
- Within 12 business hours
Send the installation layout and fitting requirements with the request so the product configuration and delivery scope can be included in the quote.
Include these details with the RFQ
- Flat-rim configuration and 1524 × 810 × 497 mm overall size
- Quantity
- Destination market and port
- Drain orientation and drain/overflow fitting scope
- Faucet mounting plan
- Requested delivery window
Confirm the quantity, configuration, fitting scope and lead time in the written quotation before ordering.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request