摇篮式侧面造型矩形独立式浴缸，双端式，59和67英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8021 是一款白色亚克力双端式矩形独立式浴缸。长边侧壁平直，两端壁向下收拢至面积较小的平底，侧面轮廓如摇篮，上方是薄而直角的缸沿。提供两种长度：D-8021-150 为1500 x 750 x 600 mm（59 x 29.5 x 23.6英寸），D-8021-170 为1700 x 750 x 600 mm（67 x 29.5 x 23.6英寸）。
排水口位于浴缸中央。缸沿不开水龙头孔，D-8021 需搭配落地式或壁挂式浴缸水龙头。D-8021 通过 cUPC 认证，每份报价均在12个工作小时内发出。更多造型见独立式浴缸系列。
本款适合工程批量采购，也可为 Amazon、Wayfair 等电商平台卖家供货，常用于酒店、公寓和住宅开发项目。
更多 独立式浴缸
每款型号 MOQ · 一个40HQ货柜，数量按浴缸尺寸而定
浴缸规格表
尺寸与安装： D-8021
以下每个选项均为已量产配置，并拥有独立 SKU。 2 sizes。 请在每一行采购订单上注明确切的 SKU。
订货编码
| SKU | Size |
|---|---|
| D-8021-150 | 59" x 30" |
| D-8021-170 | 67" x 30" |
同一份采购订单内可接受混合配置订货。请在样品确认前，核对报价单上的 SKU、表面处理和尺寸。 索取完整配置清单.
对比 · 2 sizes
Size & spec comparison
| 59" x 30"D-8021-150 | 67" x 30"D-8021-170 | |
|---|---|---|
| 整体 长×宽×深 | 59″ × 29.5″ × 23.6″ 1500 × 750 × 600 mm | 67″ × 29.5″ × 23.6″ 1700 × 750 × 600 mm |
上述通用规格适用于所有尺寸；表格仅对比随尺寸变化的项目。OEM/ODM 可定制尺寸。
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Profile & Ends
Flat sides, curved ends, cradle-like base
D-8021 keeps its long sides flat and brings both end walls down in a curve to a base smaller than the rim. The rim is thin, with sharp corners on a square-cornered rectangular plan.
Matching curves at both ends
Both ends of D-8021 are shaped the same, so either one can serve as the backrest. The curve pulls the base in from the rim outline at floor level.
Thin rim with square corners
The rim is a slim edge rather than a deck, with no tap holes. Plan a floor-standing or wall-mounted filler whose spout reaches past the thin edge.
Other rectangular and oval shapes sit in the freestanding bathtub range.
Fit & Drain
59 or 67 in long, 750 mm wide
Both D-8021 lengths are 750 mm (29.5 in) wide and 600 mm (23.6 in) high. The drawing puts the inner depth at 460 to 470 mm (18.1 to 18.5 in).
- D-8021-150
- 59" × 29.5" × 23.6" (1500 × 750 × 600 mm)
- D-8021-170
- 67" × 29.5" × 23.6" (1700 × 750 × 600 mm)
- Drain Position
- Center: 750/850 mm from the end, 375 mm from the side
- Faucet Mounting
- Floor-standing filler or wall-mounted spout
Because the drain is centered on both axes, the floor waste lands in the middle of the footprint: 750 mm in from the end on the 1500 mm tub and 850 mm on the 1700 mm tub, 375 mm from either long side. Leave room to clean around the curved ends, since the base sits inside the rim line.
Confirm the drain coordinates for the chosen length on the approved drawing before the waste is set in the floor.
Material & Finish
White acrylic, no feet or plinth
D-8021 is formed from pure acrylic sheet in white and stands directly on the floor with no feet or plinth.
White
One white for both lengths
Ordering the 1500 mm and 1700 mm tubs in the same white keeps a mixed-size project consistent from room to room.
The surface sheen of D-8021 is confirmed on the approval sample, so check it there before the order is released.
Record the sample's finish as the reference for incoming inspection.
Compliance
cUPC certification for D-8021
Keep D-8021 paperwork under the model number, with the SKU list attached for the project record.
D-8021 is cUPC certified. Ask for the certificate to name both D-8021-150 and D-8021-170 so either length can go into a submittal without a second request.
State the destination market when you enquire, and the document set will be prepared against it. Written answers to enquiries go out within 12 business hours.
Procurement
Ordering D-8021
Quote each D-8021 length as its own line, with a lead time of 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- within 12 business hours
Use the sample to check how the curved ends meet the floor and how the thin rim edge is finished before production starts.
询价时请附上以下信息
- Quantity per SKU: D-8021-150, D-8021-170
- Floor or wall faucet plan
- Sample SKU to approve
- Destination market and port
- Carton marking and labels
- Target shipping window
Lead time is counted from the day the sample is approved.
我们的工作方式
从询盘到发货
专为进口商、经销商和项目采购方打造的工厂直供流程，中间没有贸易环节。
-
01
发送询盘
请告知型号、数量、目的地市场及品牌或包装要求。提供规格书或图纸会有帮助，但并非开始所必需。
-
02
销售团队与您联系
专属客户经理会通过邮件或 WhatsApp 跟进，确认规格，并在报价前澄清缺失的信息。
-
03
报价
您将收到书面报价单，包含单价、MOQ、包装细节、交期以及您所要求的贸易条款。入门、中端和高端配置可并列报价。
-
04
样品确认
我们提供样品，供您对表面处理、功能和包装签字确认。品牌样品在图稿确认后制作。
-
05
生产与发货
样品确认并支付定金后开始量产。装柜前进行质检和验货，随后按约定发往指定港口。
按您的规格提供 OEM 和 ODM
我们按您的需求书开发。请发送参考型号、图纸，或仅提供目标价格区间和市场，我们将提出合适的方案。入门、中端和高端配置均可由同一工厂提供。
- 产品、纸箱和文件上印制您的标志
- 自有品牌包装和说明书
- 按您的标准匹配定制表面处理
- 在量能支持时提供定制尺寸和模具
- 根据您的参考或目标价格进行产品开发
- 按需准备目的地市场所需文件