Lavabo redondo profundo de cerámica sobre encimera con rebosadero, 16.5"

The 16.5 inch deep round ceramic vessel sink, model SN134-537, is built to the following confirmed measurements, taken from the factory specification drawing.

• Overall diameter: 16.4 in (415 mm), marketed as a rounded 16.5 inch label
• Overall height: 6.5 in (165 mm), measured as the full exterior height of the vessel
• Drain opening: 1.8 in (45 mm) inner diameter, with a 2.8 in (70 mm) outer diameter at the underside
• Faucet hole: none, the basin ships without a pre-drilled deck faucet hole
• Material: glazed ceramic
• Color and finish: white, gloss
• Mounting: above-counter, vessel installation

The SN134-537 is made from glazed ceramic and finished in white with a glossy surface. The glaze is hard and non-porous, so the basin wipes clean and presents a uniform white face on the counter.

Buyers developing private-label collections can submit specific finish or color requirements for review against production capability. Custom finish options are reviewed and quoted on request.

The SN134-537 is a round above-counter ceramic vessel sink, designed to sit on top of a finished counter or vanity rather than drop into a cutout. Installation calls for a counter surface able to support the weight of the basin and a tailpiece routed through to the drain below.

Because the basin sits above the counter, the installed height combines the counter height with the 6.5 in (165 mm) body of the vessel, which affects faucet selection and overall ergonomics. Project specifiers can request the specification drawing to confirm fit against their counters and cabinetry.

The basin has a center drain opening with a 1.8 in (45 mm) inner diameter and a 2.8 in (70 mm) outer diameter at the underside. It ships without a pre-drilled faucet hole, so the faucet is mounted separately, either on the wall or on the counter deck behind the basin. This gives specifiers the flexibility to pair the basin with the faucet selected for the project.

The drain assembly should be matched to the basin's final overflow configuration. Once that configuration is verified, SANIKB can confirm the correct drain to specify so the basin and drain work together on site.

SANIKB produces the SN134-537 as a factory-direct OEM and ODM partner. Buyers can order the standard model or work with SANIKB on private-label and custom programs, including branded or unbranded packaging and product specifications adapted to a buyer's requirements.

Customization scope, minimum order quantities, and program terms are set per program. Send your project specifications to start a review.

As a factory-direct manufacturer, SANIKB ships the SN134-537 for both bulk and project supply. Export packaging, carton configuration, and container loading are arranged to suit the order volume and destination market.

For distributors, importers, and project buyers, pricing, order quantities, lead times, and shipping terms are set per order based on volume and destination. Final landed cost will depend on the shipping terms and destination duties that apply to your order. Send your target quantities and destination to receive a quote.