Y2 Smart Bidet Toilet with Dual-User Memory and UV Sterilisation

The Y2 is a floor-mounted smart toilet with the bidet seat integrated into the vitreous china body. These are the figures published for the model; anything not listed here is confirmed from the factory drawing on request.

• Overall size: 720 × 455 × 510 mm (28.3" × 17.9" × 20.1")
• Mount: floor-mounted, vitreous china, integrated bidet seat
• Rough-in: S-trap, 305 mm (12 in)
• Flush: siphonic, 1.28 gpf (4.8 L)
• Electrical: AC 110 V / 60 Hz, IPX4, instant-heating water
• Finish: white
• MOQ: 20 pcs, mixed 1×20 ft container accepted

The rough-in published for the Y2 is an S-trap at 305 mm (12 in) from the finished wall to the outlet centre.

The unit is powered. The published electrical specification is AC 110 V / 60 Hz with IPX4 ingress protection and instant water heating, which puts an outlet on the rough-in drawing alongside the supply and the waste.

The three size figures are published in the order 720 × 455 × 510 mm without labelled axes. Both are reasons to set out from the drawing rather than from the page.

The Y2 is fitted with the functions below. The list is what the factory publishes for this model, in its own wording.

• Dual-user memory
• Spray-wand UV sterilisation
• UV water-path sterilisation
• Adjustable wash range
• Child wash
• Massage wash
• Foot-touch flush
• Off-seat auto flush
• Heated seat
• Rear and front wash
• Warm-air dryer
• LED display and night light
• Smart flush and temperature

The Y2 is published in one configuration: automatic lid with built-in tank. Two options are published against it — a foam shield and voice control. Both are decided at order stage, so they belong in the enquiry rather than in a later change note.

MOQ on the Y2 is 20 pieces and a mixed 1×20 ft container is accepted, so a 20-piece line can ship beside other models instead of waiting for a full container of one SKU. Lead time is 20 to 45 days after deposit.

A single enquiry that carries the quantity, the destination market and port, the confirmed 110 V / 60 Hz supply and the confirmed 305 mm S-trap set-out can be quoted without a second round of questions. Enquiries are answered within 12 business hours.

Y2 is cUPC listed. Request the current listing number and certificate validity before the model goes into a submittal, so the documentation matches the destination market rather than a general claim.

The submittal pack we can supply is the drawing carrying the 305 mm S-trap rough-in and the 720 × 455 × 510 mm size, the fitted function list for the configuration ordered, and the cUPC listing details. Tell us the market and the approving authority and we will confirm in writing what exists for that exact configuration before it is specified.