E5 Foot-Touch Flush Smart Bidet Toilet with Heated Seat and UV Sterilisation

The E5 is a floor-mounted smart toilet in vitreous china with the bidet seat integrated. The figures below are the ones held on the specification sheet; nothing else is stated for this model.

• Overall size 680 × 395 × 485 mm (26.8" × 15.6" × 19.1")
• Floor-mounted vitreous china body with integrated bidet seat
• Rough-in: S-trap 305 mm (12 in)
• Siphonic flush, 1.28 gpf (4.8 L)
• Electrical AC 110 V / 60 Hz, ingress protection IPX4, instant-heating water
• Auto lid; built-in tank; foam shield and voice control optional
• White. MOQ 20 pcs, mixed 1 × 20 ft container accepted. cUPC-marked.

One trap position is published for the E5: S-trap 305 mm (12 in) from the finished wall to the outlet centre. Where an existing slab has been set to another distance, the trap position has to be resolved before the order is fixed rather than at delivery.

Because the fixture is electric, the supply point belongs on the same drawing as the waste and the water connection. The published electrical rating is AC 110 V / 60 Hz with IPX4 ingress protection.

Three items decide whether the drawing can be signed off: the outlet centre measured on site against 305 mm (12 in), the supply voltage available at the fixture, and the overall footprint of 680 × 395 × 485 mm against the stall or alcove width.

The function list below is the one published with the specification. Foam shield and voice control sit outside it and are optional.

• Auto open / close lid
• Heated seat
• Off-seat auto flush
• Foot-touch flush
• Rear & front wash
• Mobile & adjustable-nozzle wash
• Warm-air dryer
• Remote control
• LED display & night light
• Spray-wand UV sterilisation
• Built-in perfume
• Massage wash
• Auto temperature
• Child wash
• Power-failure flush

MOQ for the E5 is 20 pieces. A mixed 1 × 20 ft container is accepted, so a project taking a small count of smart toilets can make the container up with other models in the range. Lead time is 20–45 days after deposit.

An enquiry moves faster when it carries the quantity per model, the destination port, the delivery window, the trap position measured on site, the supply voltage at the fixture, and any carton marking or manual language requirement.

E5 is cUPC listed. The published specification also holds material, type, mount, finish, size and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.

No marks or ratings other than cUPC and the IPX4 electrical rating are stated for this model. Where a project requires paperwork beyond that, raise it with the enquiry. Written enquiries are answered within 12 business hours.