Foot-Sensing Flush Smart Bidet Toilet with Dual-User Memory, UV Sterilisation

964 is a floor-mounted smart bidet toilet in vitreous china, finished in white, with the bidet seat integrated into the body. The flush is siphonic at 1.28 gpf (4.8 L). Everything below is taken from the published specification for this model number.

• Overall size: 28.1" × 18.9" × 21.3" (715 × 480 × 540 mm)
• Material: vitreous china; finish: white
• Mounting: floor-mounted
• Flush: siphonic, 1.28 gpf (4.8 L)
• Rough-in: S-trap 305 mm (12 in); P-trap 180 mm
• Power: AC 110 V / 60 Hz, IPX4, instant-heating water
• MOQ: 10 pcs; mixed 1×20 ft container accepted
• Marking: cUPC

This body is published against two waste positions. The S-trap figure is 305 mm (12 in) and the P-trap figure is 180 mm. A project that mixes outlet positions has to state which trap applies to which unit, because the two figures are not interchangeable once the slab is poured or the wall is closed.

The unit is powered, so a socket has to be planned with the waste rather than after it. The published supply is AC 110 V / 60 Hz and ingress protection is IPX4. Where a market runs a different voltage or frequency, raise it in the enquiry so the build is quoted against the destination.

The published function list for 964 holds dual-user memory, menstrual-care wash, massage wash, foot-sensing flush, off-seat auto flush and a heated seat. Also listed are rear and front wash, mobile wash, warm-air dryer, LED display and night light, UV sterilisation, auto temperature, child wash and power-failure flush.

Four build codes are published — A, B, D and E. They cover manual or automatic lid, and with or without a built-in tank. Foam shield and voice control are listed as options. The code decides what leaves the factory, so it belongs on the purchase order, not in an email thread.

• Lid: manual or automatic, by build code
• Tank: with or without built-in tank, by build code
• Options: foam shield, voice control

964 is cUPC listed. The published specification also holds material, type, mount, finish, size and MOQ. Before the model goes into a submittal, request the current listing number and certificate validity so the documentation matches the destination market.

Documents are issued against a model number and a build code, not against a range. On a mixed order, list each reference separately in the request so nothing is assumed to carry across.

Minimum order quantity is 10 pieces and a mixed 1×20 ft container is accepted, so a trial quantity of 964 can ship with other references on one booking. Lead time is published as 20–45 days after deposit and is indicative until the quotation is issued.

Private label work, including carton and insert marking, runs through the SANIKB OEM and ODM program. Send quantity, destination market and port, waste position, build code and any options with the enquiry; enquiries are answered within 12 business hours.