Cafe Beige and a ceramic integrated basin define this compact configuration. A mirror cabinet replaces the separate mirror compositions shown in several other families. The NB-3036 cabinet material is stainless steel. Its 1 configuration uses ceramic at the basin surface. Each complete factory model identifies a particular cabinet and mirror combination. The floating arrangement shown here leaves the floor visible beneath the unit.
The listed basin arrangement is an integrated ceramic basin. Its surface category is ceramic, distinct from the cabinet finish. For NB-3036-100, the remaining main-cabinet measures are 500 and 550, with the source unit printed as mm. The selected surface name appears in the component schedule below. Package contents and the supplied faucet or drain should be agreed in the quotation.
FORM & FINISH
The treatment is identified as Cafe Beige. Finish selection is separate from the stainless-steel body specification. NB-3036-100 carries a first listed cabinet measure of 1000 mm. Use that model reference when comparing a finish sample with the photographed cabinet. A veneer or woodgrain label identifies the named treatment; it does not turn the cabinet specification into solid wood.
BASIN & COUNTERTOP
The listed basin arrangement is an integrated ceramic basin. Its surface category is ceramic, distinct from the cabinet finish. For NB-3036-100, the remaining main-cabinet measures are 500 and 550, with the source unit printed as mm. The selected surface name appears in the component schedule below. Package contents and the supplied faucet or drain should be agreed in the quotation.
MODEL CONFIGURATIONS
The configuration schedule contains 1 original model code: NB-3036-100 — first cabinet measure 1000 mm. The 1000 model has a 550 third main-cabinet measure, which differs from the 450 measure in NB-3035. Read the model-specific component rows before finalizing the cabinet arrangement.
COMPONENT PLANNING
The mirror cabinet for NB-3036-100 has the listed sequence 980 × 150 × 750 mm. The dimension order follows the catalog rather than a newly assigned set of axes. The main cabinet in this configuration has 3 printed measures, so the mirror entry must be considered separately. Confirm installation requirements and the electrical specification where relevant to the chosen model.
Cafe Beige Vanity Finish describes the specified appearance rather than a change to the cabinet body. NB-3036 retains the catalog's stainless-steel material designation. The mirror cabinet entry for NB-3036-100 starts at 980 mm. A coordinated finish choice should therefore consider the cabinet face and the separate mirror composition. Keep color codes and veneer descriptions on the finish schedule, and request the named treatment against the full model identity.
Ceramic Integrated Basin Countertop is the named surface choice for NB-3036. This family has 1 printed model, and its reference cabinet sequence includes 500 as the second value. Surface selection must also account for the documented basin arrangement. A decorative-stone trade name does not establish an unprinted geological grade, while a slab label should not be silently rewritten as marble. Keep the material wording specific to the model when preparing the project quotation.
1000 Mm Cabinet And Mirror Coordination is a component-matching task, not a comparison of room-image scale. The first two mirror values are 980 and 150 mm. A third figure, 750 mm, is printed separately in the same sequence. The component list separates the lower cabinet from the mirror assembly. The model count for NB-3036 is 1; use the selected code to find its own dimensional row. Cabinet changes can affect the upper composition, even when two pictures share a finish. Establish the final installation requirements with the complete cabinet and mirror specification.
