Custom & Wholesale Bathroom Hardware Sets: A B2B Sourcing Guide for Towel Bars, Rings & Robe Hooks
Sourcing matched SUS304 towel bars, rings and hooks as one program: finish coordination across the set, OEM and private label, MOQ, lead time and documentation.
On this page
Wholesale Bathroom Hardware: How to Source Matched SUS304 Accessory Sets for Projects
If you are a distributor stocking a bathroom-accessory program, a hospitality group fitting out hundreds of rooms, a builder pricing a multi-unit job, or a private-label brand building a catalog, the hard part of sourcing wholesale bathroom hardware is rarely finding a single towel bar. The hard part is sourcing a coordinated set — towel bar, towel ring, robe hook, toilet paper holder, brush holder, soap dish, tumbler, glass shelf, towel rack — where every piece is the same alloy, the same finish, the same mounting standard, and carries the same documentation pack. When the robe hook does not match the towel bar, or two pieces use different base metals that age at different rates, you own that problem on site.
This is the hub for SANIKB’s bathroom-hardware program. We are a Foshan kitchen and bath manufacturer with 25 years of export experience, and we make our accessories in SUS304 stainless steel, wall-mounted with concealed screws, across seven coordinated finishes. Below is the full B2B view: what belongs in a matched set, why finish coordination across a set matters for spec consistency, how OEM and private-label work, and the MOQ, lead-time, documentation and packaging realities you should plan around. For specifiers comparing whole programs, our companion guide on contract-grade bathroom fixtures for projects covers the wider spec picture. To go straight to product, browse the full wholesale bathroom hardware range.
What a Coordinated Bathroom Hardware Set Actually Includes
COORDINATED HARDWARE COMPONENTS TO EVALUATE
Confirm the exact model, finish, dimensions and project quantity on the current product page and submittal before purchase.
Active 817-series single-towel-bar component example; coordinate the family geometry, physical finish sample, mounting package, lot and replacement identity. This is not a bundled set SKU.
View product & request pricing
Active 817-series towel-ring component example; approve it with the same-family bar and hook as separate components, not as one bundled product.
View product & request pricing
Active 817-series robe-hook component example; verify the wall interface, finish/lot and replacement mapping for the exact component.
View product & request pricing“Set” means different things to different buyers. A budget hotel room might be specified with four pieces; an upscale ensuite or a luxury residential build can run to nine or more. The point of buying as a set rather than piece-by-piece is that you lock one alloy, one finish batch and one mounting system across the room. Here is the standard family of accessories and where each one earns its place on a project.
| Accessory | Function | Typical project use |
|---|---|---|
| Towel bar (single / double) | Hangs bath / hand towels | Every bathroom; double bar for family baths & suites |
| Towel ring | Hand towel beside the basin | Vanity zone; powder rooms with no bar space |
| Robe hook | Robes, garments, loofahs | Behind the door, beside the shower |
| Toilet paper holder | Roll holder, with or without cover | Every WC; covered version for hospitality |
| Toilet brush holder | Stores brush off the floor | Standard in hotel and rental turnkey specs |
| Soap dish | Bar soap by basin or shower | Residential and amenity-bar hotels |
| Tumbler holder | Holds glass / toothbrush cup | Vanity wall; matched glass or stainless cup |
| Glass shelf | Open storage over basin | Mid-to-upscale baths; amenity display |
| Towel rack / shelf rack | Folded-towel storage with bar | Hotels, gyms, larger ensuites |
The three pieces that go into virtually every spec are the towel bar, the towel ring and the robe hook — which is why those are the anchors of SANIKB’s catalog. You can browse them directly: wholesale towel bars, wholesale towel rings, and wholesale robe hooks. Everything else in the table is built to the same alloy and finish so a set stays consistent.
Why Finish Coordination Across the Set Matters
This is the failure mode that costs project buyers the most: mismatched finishes within one room. If the towel bar reads as a warm gold and the robe hook reads as a cooler gold, an installer notices, a designer notices, and a hotel inspector notices. The fix on site — reordering one piece, holding a unit, eating the freight — is far more expensive than specifying the whole set from one manufacturer in the first place.
Two things drive coordination. First, the base metal: when every piece is the same SUS304 stainless, the finish lays down the same way and ages the same way over years of cleaning chemicals and humidity. Mixing a stainless towel bar with a zinc-alloy hook from another supplier is the classic way to get drift. Second, the finish process: matching pieces from one production batch keeps the tone consistent. SANIKB offers seven finishes across the whole accessory family so a buyer can lock one look from towel bar to tumbler:
- Chrome — the volume workhorse for hotels and rentals
- Polished Chrome — brighter mirror tone
- Brushed Nickel — soft satin, hides water spotting
- Polished Gold — bright warm tone for upscale baths
- Brushed Gold — muted warm tone, current design favorite
- Gun Grey — dark contemporary tone
- Antique Bronze — traditional / transitional schemes
Pick one finish for the whole program and the room is coherent. The chrome 821001 single towel bar, the matching chrome towel ring 821009 and the chrome robe hook 821008 are designed to read as one family. For a warmer scheme, the polished gold towel ring 814009 shows how the same forms carry across finishes — useful when a buyer wants custom towel rings as the signature piece of a private-label line.
Construction: SUS304, Wall-Mounted, Concealed Screws
Every SANIKB accessory is made from SUS304 (18-8) stainless steel — the corrosion-resistant grade with roughly 18% chromium and 8% nickel. In a bathroom, that grade is what resists the rust, pitting and finish failure that plague cheaper builder hardware. The mounting standard is wall-mounted with concealed screws: the bracket is drilled and fixed to the wall, then the body covers the fasteners so the finished piece shows no visible screw heads.
That mounting choice is deliberate and it sets the scope of this catalog. If your search intent is “no-drill” or “suction”, here is the straight tradeoff: adhesive and suction mounts install fast and leave no holes, but they are not a load-rated, turnover-proof spec — suction loses grip on textured or unsealed surfaces and adhesive ages with heat and humidity. For hotels, rentals and TI projects that must survive guest after guest and tenant after tenant, the durable answer is wall-mounted SUS304 that does not loosen, sag or fall off a wall during a stay. That is the project-grade line we build, and it is the right spec for any program that has to last through turnover.
OEM & Private-Label: Your Brand, Your Packaging, Custom Finish
For brands and large distributors, the bathroom-hardware program is built for private label. We routinely produce hardware under a customer’s brand — your logo on the product where appropriate, your retail or contract packaging, your barcodes and SKUs, and your insert and warranty documentation. On the product side, custom finish is the most-requested service: beyond the seven stock finishes, SANIKB can develop a specified finish tone to match an existing collection or a designer’s palette, and can adjust dimensions and forms on volume custom-tooling programs. Custom towel rings and custom toilet paper holders are common starting points because they are high-visibility, low-tooling pieces where a brand can establish a signature look quickly.
Private-label timelines run longer than stock because they add artwork approval, a pre-production sample sign-off, and (for new finishes or forms) tooling and finish development. The path is predictable: confirm the spec and finish → approve a pre-production sample → lock packaging artwork → production run. Build that approval loop into your launch calendar rather than against your in-stock date.
MOQ, Lead Time, Certifications & Export Packaging
MOQ. A single unit can be ordered to evaluate fit, finish and feel before you commit. Wholesale project pricing begins at a per-model minimum — SANIKB’s standard MOQ is 50 pcs per model — and final MOQ depends on the model, finish and any customization, confirmed on your quote. Because a “set” is several models, plan the MOQ per piece (per finish), not per set.
Lead time. In-stock items and samples ship in days. A standard production run is a few weeks once the spec and finish are locked. Full-container or customized / private-label orders take longer, plus destination-dependent ocean transit. Exact dates are confirmed per PO — we do not quote a blanket day count, because it moves with quantity, finish and season.
Certifications & documents. On request we supply material certificates for the SUS304 stainless, dimension drawings, cut sheets and packaging specifications for your QC and customs files. Where a market requires specific listings, those are confirmed per model and market rather than claimed as a blanket certification.
Export packaging. Accessories ship in individual protective boxes with mounting hardware and a fitting template, then in master cartons palletized for container loading. We can print retail-ready boxes for private-label programs and adjust carton quantities to your handling preferences. Tell us the destination port and we will spec the packaging and loading plan around it.
How to Brief SANIKB for a Set Quote
To get an accurate quote back fast, send four things: (1) the accessory list for the set — which pieces, in what quantities; (2) the single finish you want across the program; (3) whether it is stock-branded or private label; and (4) the destination port. With that, a SANIKB engineer returns MOQ per model, lead time, and the documentation pack so your procurement and QC teams can move. Start from the full wholesale bathroom hardware catalog to pick your pieces, then send the list.
Frequently Asked Questions
What is the MOQ for wholesale bathroom hardware sets?
You can order a single unit to evaluate. Wholesale project pricing begins at a per-model minimum, and SANIKB’s standard MOQ is 50 pcs per model. Because a set is several models, the MOQ applies per piece per finish, and the final figure depends on model, finish and customization, confirmed on your quote.
Can I order a matched set in one finish across all pieces?
Yes. SANIKB makes the full accessory family — towel bar, towel ring, robe hook, toilet paper holder, brush holder, soap dish, tumbler, glass shelf and towel rack — in seven coordinated finishes: Chrome, Polished Chrome, Brushed Nickel, Polished Gold, Brushed Gold, Gun Grey and Antique Bronze. Specify one finish and every piece is built to match.
Do you offer OEM and private-label bathroom accessories?
Yes. We produce hardware under your brand with your packaging, barcodes, SKUs and documentation, and can develop a custom finish tone or custom forms on volume tooling programs. Private-label timelines add artwork approval and a pre-production sample sign-off, so build that loop into your launch schedule.
How are SANIKB accessories mounted?
All SANIKB bathroom accessories are wall-mounted in SUS304 stainless steel with concealed screws. For hotels, rentals and TI projects that must survive turnover, wall-mounted SUS304 is the durable, project-grade spec that will not loosen or fall.
What is the lead time for a hardware order?
In-stock items and samples ship in days. A standard production run is a few weeks after the spec and finish are locked. Full-container and customized or private-label orders take longer, plus destination ocean transit. Exact dates are confirmed per PO because they move with quantity, finish and season.
What documentation and packaging do you provide for export?
On request we supply SUS304 material certificates, dimension drawings, cut sheets and packaging specs. Accessories ship in individual protective boxes with mounting hardware and a template, then in master cartons palletized for container loading. Retail-ready boxes are available for private-label programs, and packaging is specced to your destination port.
Request project pricing. Send your model(s), target quantity and destination port and a SANIKB engineer will return a quote with MOQ, lead time and a full documentation pack. Request a quote.
— Rokan