Rear Outlet Toilets

A rear outlet toilet sends waste horizontally through the wall behind the bowl, through a P-trap, instead of down into the floor. This collection holds 150 rear outlet toilets in ceramic, spanning wall hung, one-piece, two-piece, back-to-wall and smart toilet bodies. The printed P-trap height is 180 mm on 133 models, with others listing 135, 150, 170, 175 or 185 mm. Many floor-standing models also list an S-trap rough-in, most often 10 in, with 12, 16, 8, 6 and 4 in settings on selected models. Washdown is listed on 54 models, swirl on 39, rimless on 27, dual jet on 15 and siphonic on 13. Body lengths run from 470 to 750 mm, and white is listed on 146 models. The range suits renovation and new-build projects where the drain runs through the wall.

Leistung
OEM / ODM · kostenlose Form ab 300 Stück
MOQ
1×20ft-Container · beliebiger Produktmix
Lieferzeit
30–45 Tage nach dem Muster
150 Produkte

Sende ein Pflichtenheft. Erhalte ein echtes Angebot innerhalb von 12 Geschäftsstunden.

Nur B2B. Keine automatisierten Antworten, keine Standardkataloge. Ein SANIKB-Ingenieur prüft Ihre Anfrage und antwortet innerhalb von 12 Geschäftsstunden mit Machbarkeit, Mindestbestellmenge, Lieferzeit und einem detaillierten Angebot.

Ein aufgeschlüsseltes Angebot — statt fünf
Machbarkeit & Zertifizierung je nach Markt geprüft
Haben Sie eine Spezifikationsdatei? Fügen Sie sie unten Ihrer Anfrage bei.
— Projektanfrage Nur B2B
Bitte geben Sie Ihren Vornamen ein.
Bitte geben Sie Ihren Unternehmensnamen ein.
Bitte geben Sie eine gültige E-Mail-Adresse ein.
Bitte geben Sie Ihre Telefonnummer ein.
Ziehen & ablegen oder Dateien auswählen PDF / IMG / XLS · 4MB ×3
    Antwort eines Ingenieurs innerhalb von 12 Geschäftsstunden

    Herstellerdokumentation

    Der Geltungsbereich der Zertifizierungen hängt vom gewählten Modell und Zielmarkt ab. Fordern Sie die modellspezifischen Unterlagen mit Ihrem Angebot an.

    IAPMO-cUPC-Zertifikat
    ISO-9001-Zertifikat für Qualitätsmanagement
    WRAS-Zertifikat für das zugelassene Produkt
    IAPMO-Listungszertifikat
    UDEM-Zertifikat für die technische CE-Prüfung

    Häufige Fragen

    Which rear outlet toilet types are in this collection?

    The collection holds 150 rear outlet toilets. By body type, 64 are one-piece, 60 wall hung, 16 two-piece, 6 back-to-wall and 6 smart toilets, with a few models tagged under more than one type. Body lengths run from 470 to 750 mm. Use the type filter first, then compare outlet heights and footprints on each product page.

    What P-trap heights do these rear outlet toilets use?

    The printed P-trap height is 180 mm on 133 of the 150 models. Other models list 135, 150, 170, 175 or 185 mm, and the 135 mm height appears on wall-hung smart toilets. Match the printed height to the drain position in the wall, and confirm it against the drawing on each product page before the wall is finished.

    Can rear outlet toilets also connect to a floor drain?

    Many floor-standing models list both a P-trap rear outlet and an S-trap floor outlet. The most common S-trap rough-in is 10 in (77 models), followed by 12 in (29), 16 in (12) and 8 in (11), with single models at 6 and 4 in. Check the product page for the settings each model lists, or browse the 10 inch rough-in collection.

    What is the MOQ and lead time for rear outlet toilets?

    MOQ, samples and lead time are quoted per model, because they depend on the model mix, finish, carton marking and destination. Send the rear outlet toilet models, quantities and destination port in one inquiry, and the quotation states each figure line by line. Written replies are issued within 12 business hours, so a project schedule can be checked before the order is placed.

    Can rear outlet toilets be supplied under our own brand?

    Private-label supply runs through the SANIKB OEM and ODM program: brand marking on the product, carton and inserts, with documents prepared model by model. Certification marks are listed per model (some models print CE or cUPC), so name the target market and the marks it requires, and the quotation lists which models fit. Mixed containers can carry several body types under one brand.

    How should a distributor choose a rear outlet toilet?

    Start with the wall: wall hung toilets need a wall-hung installation, while one-piece, two-piece and back-to-wall bodies stand on the floor. Next, match the printed P-trap height to the drain. Then choose a flushing style, washdown, swirl, rimless, dual jet or siphonic, and compare body length against the room layout.