直角30x18单槽台下厨房水槽，28英寸盆体
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
301810S将28英寸 × 16英寸、带90度直角的单槽盆置于30英寸 × 18英寸（762 × 457 mm）的台下厨房水槽槽体内，采用拉丝缎面304不锈钢。
厚度为16G或18G，盆深6至10英寸。盆底附垫层，排水口3-1/2英寸。MOQ为50件，每箱1PC。
适合商业空间和公寓厨房的工程批量采购；Amazon、Wayfair等电商平台卖家也可由我们供货。
More in 台下厨房水槽
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Dimension sheet
Sizes and cut data for 301810S
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
90-DEGREE CORNERS
A 28 inch undermount kitchen sink with square corners
Square 90-degree corners are the defining detail of this 30 x 18 zero radius undermount single bowl kitchen sink. 301810S sets a 28 × 16 inch bowl inside a 30 × 18 inch body.
Brushed Satin
Zero radius inside the bowl
Corners meet at a sharp 90 degrees, giving the basin a crisp, geometric inner line in brushed satin 304 stainless steel.
Padding is attached under the bowl of this stainless steel kitchen sink, and one 3-1/2 inch drain opening serves the basin. Gauge is 16G (1.5 mm) or 18G (1.2 mm) stainless steel, chosen per order, so 16 gauge stainless steel is available.
Zero radius gives the sharpest inner line among undermount sinks. A rounded bowl is a different design choice, not a quality ranking.
BASIN GEOMETRY
Bowl dimensions: one undivided 28 inch floor
28 × 16 inch floor
One bowl without a divider gives pots, trays and boards a clear flat area, edge to edge.
Five bowl depths
Depths run 6, 7, 8, 9 and 10 inches. Two gauges across five depths make ten builds on one model number.
One-inch rim all round
The 28 × 16 inch bowl sits inside a 30 × 18 inch body, which leaves about 1 inch per side.
301810S DATA
Every size and build option in one table
- Model
- 301810S
- Overall size
- 30.0" × 18.0" (762 × 457 mm)
- Bowl
- 28" X 16"
- Bowl depths
- 6" / 7" / 8" / 9" / 10"
- Drain opening
- 3-1/2"
- Corner
- Zero radius
- Material
- 304 stainless steel
- Gauge
- 16G/18G
- Finish
- Brushed Satin
- Mount
- Undermount
- Packing
- 1PC / Box
CUTOUT AND CABINET
Planning the cutout, rim and faucet space
Undermount means the cut stone edge becomes the visible rim. Measure the cabinet width and the counter depth before the template is made.
Ask the fabricator to cut from the template and the spec sheet and confirm the 30 × 18 inch outside size against the cabinet opening.
Keep the faucet position and the drain centre on the same drawing as the cutout.
For a refit, measure the existing base before ordering, because the 30 × 18 inch body has to clear the opening.
PROJECT PROGRAMS
Where the 30 x 18 size gets specified
Multifamily kitchens fitted with this kitchen sink benefit from a fixed gauge and depth across every unit, which keeps a repeat program simple to order and install.
Retail ranges use the five depths to offer shallow and deep versions without a second model number. A dealer lists one code and lets the customer pick the depth.
One wide basin with square corners replaces a double bowl split where the project wants a single working floor.
ORDER TERMS
Carton, container and quotation details
- MOQ
- 50 pcs
- Container
- Mixed 1×20 ft accepted
- Packing
- 1PC / Box
SANIKB makes 301810S itself in Foshan. Related sizes sit in the stainless steel kitchen sinks range, and branded runs go through the OEM/ODM service.
Name one gauge and one depth per order line. Quotation follows within 12 business hours. Ask for the spec sheet with it and keep the sheet in the order file, so the fabricator, the plumber and the buyer all work from the same sizes and the same 3-1/2 inch drain opening.
Include in your request
- Gauge, 16G or 18G
- Bowl depth, 6" to 10"
- Quantity and destination
- Carton or label artwork
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request