26英寸大号长方形陶瓷台上盆，单个水龙头孔
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SN148B是一款26英寸亮白色卫生陶瓷台上盆，台面已钻好单个水龙头孔，安装于台面之上，占位尺寸660 × 450 mm。
酒店和公寓采购方将其作为各房型、各建设期通用的统一型号。我们佛山工厂直供，12个工作小时内回复报价。
大尺寸统一型号便于酒店和公寓分期项目的工程批量采购，也可为 Amazon、Wayfair 等电商平台卖家供货。
More in 台上盆 · 艺术盆
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Shape & size
Shape and size of SN148B
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
This 26 inch ceramic vessel sink with faucet hole ships with one factory-drilled opening, sized Φ35 mm (1.4″) and set toward the back of the deck. The hole is drilled into the sink's own ceramic deck, not the countertop, and is configured for a standard single-hole, deck-mounted vessel faucet. That keeps installation straightforward and reduces the parts a contractor has to source on site.
Because the hole is pre-drilled at the factory, every unit in a batch arrives in the same configuration. Distributors and project buyers can specify one matching faucet across an entire order without field drilling.
The drain area has a Φ45 mm (1.8″) opening with a Φ70 mm (2.8″) seat, sized to accept a standard vessel pop-up drain. The exact drain assembly can be confirmed with your RFQ so the fitting matches your faucet and trap selection.
The overall 660 × 450 mm footprint and rear faucet-hole placement give a clear starting point for vanity-top layout, and the fully dimensioned drawing, including faucet-hole and drain-center positions, is available with the product spec sheet for plumbing rough-in.
The format suits buyers sourcing at volume rather than one unit at a time. Hospitality FF&E teams use a single repeatable vessel across guest rooms, while multifamily and build-to-rent developers specify it for unit bathrooms where the same model needs to be available across construction phases. Showroom dealers and design-build firms use the clean rectangular shape as a flexible base specification, and e-commerce resellers list it as a defined SKU with consistent dimensions.
In every case the value is the same: one stable specification that can be reordered and matched across a project.
SANIKB manufactures direct, so this sink can be supplied under your own brand. We support OEM and ODM programs that cover custom packaging, branding, and documentation prepared for your catalog. Finish and color options, branded inserts, and spec sheets formatted for your own listings can be confirmed with your RFQ. Any tooling requirements for custom work are reviewed as part of the same process.
Pricing, MOQ, and lead time are confirmed at quotation, since they depend on order volume, finish requirements, and packaging. Samples are available on request for buyers evaluating the basin before a bulk commitment, and export packaging can be configured for your shipping method and destination market. Send your project specifications to start a quote.
HOLE LAYOUT
26-Inch Rectangular Ceramic Vessel Sink, One Factory-Drilled Hole
One configuration, no menu of options: SN148B ships with a single Φ35 mm (1.4") opening toward the back of its own deck. Every unit in a batch arrives drilled the same way.
Many vessel sinks leave the faucet to the countertop, which means a drill job on site for each vanity. Here the hole is cut into the ceramic deck instead of the stone or wood top.
For a project buyer, that turns faucet choice into one decision: a single-hole, deck-mounted vessel faucet specified once for the whole order. Above counter installation then comes down to two inputs: the rear hole position and the vanity top.
SPEC SHEET
Size, Hole and Drain Data for SN148B
- Size
- 26" × 17.7" × 5.3" (660 × 450 × 135 mm)
- Faucet hole
- Φ35 mm (1.4"), toward rear of deck
- Drain opening
- Φ45 mm (1.8")
- Drain seat
- Φ70 mm (2.8")
- Material
- Vitreous china ceramic
- Finish
- Glossy White
- Mounting
- Above-counter
- MOQ
- 20 pcs
Rough-in starts from the 660 × 450 mm footprint and the rear hole position. A fully dimensioned drawing with faucet-hole and drain-center positions comes with the spec sheet.
CONFIGURATION
What Stays Fixed and What You Can Specify
Fixed at the factory
Hole size, hole position and the Φ70 mm drain seat are set in production and repeat across the batch.
Set with your RFQ
Drain assembly, finish and color options, branded inserts and packaging are confirmed through the quotation.
Counter-side choices
Faucet height and reach, trap selection and vanity top clearance around the 660 mm width remain with your installer.
QUOTE
Send This With Your SN148B Quote Request
Quote checklist
- Quantity per model, from an MOQ of 20 pcs
- Faucet model for the single deck hole
- Preferred drain assembly for the Φ45 mm opening
- Packaging, branding and destination market
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request