哑光白矩形嵌入式人造石台盆，浴室用
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
更多 嵌入式台盆（半嵌入）
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
-
SN132-525椭圆竖纹陶瓷嵌入式台盆，带溢水口18.9" × 15.2" × 6.7"台上嵌入式
-
SN50523英寸深盆长方形嵌入式陶瓷浴室柜台盆23.2" × 18.3" × 9.1"台上嵌入式
-
SN154616英寸方形陶瓷嵌入式台盆，浴室柜用，单孔16.2" × 16.2" × 7.1"台上嵌入式
-
SN02120英寸椭圆形嵌入式陶瓷台盆，3孔20.3" × 17.5" × 8.7"台上嵌入式
-
SN042-200822英寸椭圆陶瓷嵌入式台盆，带溢水口22.1" × 18.5" × 8.0"台上嵌入式
-
SN043-2009大号椭圆自带盆沿陶瓷嵌入式台盆，8英寸三孔22.7" × 17.2" × 7.7"台上嵌入式
-
SN02019英寸圆形陶瓷嵌入式台盆，三孔Ø 19.3" × 8.3"台上嵌入式
形状与尺寸
外形与尺寸： 哑光白矩形嵌入式人造石台盆，浴室用
以下每个选项均为已量产配置，并拥有独立 SKU。 2 sizes。 请在每一行采购订单上注明确切的 SKU。
-
NO. RSW500560 × 360 × 140 mm -
NO. RSW600660 × 360 × 140 mm
同一份采购订单内可接受混合配置订货。请在样品确认前，核对报价单上的 SKU、表面处理和尺寸。 索取完整配置清单.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Drop-In Basin
A rectangular drop-in bowl for counters cut on site
The RSW is a rectangular drop-in bathroom basin in matte white solid surface, supplied as a bowl for installation into a prepared counter.
Rim carried by the counter
The basin drops into a cut-out and the counter takes the weight, so the same bowl works with stone, timber or laminate tops.
Rectangular bowl, plain rim
A straight-sided bowl lines up with a rectangular cut-out and keeps the setting-out simple for the fabricator.
Published references are RSW500 and RSW600. Integrated tops that avoid cutting the counter entirely are listed in the solid surface basin range.
Fit & Clearance
Cut-out size decides whether this basin fits
On drop-in basins the cut-out is the specification the fabricator actually uses.
- Mount
- Drop-in
- Shape
- Rectangular
- Finish
- Matte White
- References
- RSW500 / RSW600
Request the cut-out dimension for the exact reference and pass it to the counter fabricator in writing. RSW500 and RSW600 are not interchangeable once a counter is machined. Check the underside clearance for the trap before the cabinet interior is fixed.
Never scale a cut-out from a drawing. Use the cut-out dimension for the exact reference.
Construction & Finish
Solid surface bowl with a formed supporting rim
Both RSW widths are listed as solid surface with a matte white finish.
Matte White
Rim is part of the bowl
The supporting edge is cast with the basin, so the load path from counter to bowl runs through one piece of material.
The visible result depends on the fabricator as much as on the basin. A clean cut-out and a thin sealant bead give a tight line, while an oversize cut leaves a gap no product can hide.
Agree the sealant colour with the counter supplier before installation.
Compliance
Documents supplied with RSW basins
Provided in the format your counter fabricator can work from, with the market noted on the file.
RSW is cUPC listed. The published specification also holds material, type, mount, finish, size and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.
Fabricators and installers usually want the cut-out drawing more than anything else. It is issued per reference with the quotation on request.
Procurement
Stocking two drop-in widths
Supplied wholesale to importers, distributors and counter fabricators.
- Published MOQ
- 300 pcs
- Standard Lead Time
- 30–45 days (typical)
Bowl size, rim width and drilling can be adapted for a private label drop-in line through the SANIKB OEM and ODM program. Both widths can usually run together when the finish is the same.
询价时请附上以下信息
- Quantity per reference
- Cut-out drawing required
- Counter material and thickness
- Waste and pop-up requirement
- Overflow requirement
- Destination port
- Carton marking requirement
RSW500 and RSW600 are separate line items on the quotation.
我们的工作方式
从询盘到发货
专为进口商、经销商和项目采购方打造的工厂直供流程，中间没有贸易环节。
-
01
发送询盘
请告知型号、数量、目的地市场及品牌或包装要求。提供规格书或图纸会有帮助，但并非开始所必需。
-
02
销售团队与您联系
专属客户经理会通过邮件或 WhatsApp 跟进，确认规格，并在报价前澄清缺失的信息。
-
03
报价
您将收到书面报价单，包含单价、MOQ、包装细节、交期以及您所要求的贸易条款。入门、中端和高端配置可并列报价。
-
04
样品确认
我们提供样品，供您对表面处理、功能和包装签字确认。品牌样品在图稿确认后制作。
-
05
生产与发货
样品确认并支付定金后开始量产。装柜前进行质检和验货，随后按约定发往指定港口。
按您的规格提供 OEM 和 ODM
我们按您的需求书开发。请发送参考型号、图纸，或仅提供目标价格区间和市场，我们将提出合适的方案。入门、中端和高端配置均可由同一工厂提供。
- 产品、纸箱和文件上印制您的标志
- 自有品牌包装和说明书
- 按您的标准匹配定制表面处理
- 在量能支持时提供定制尺寸和模具
- 根据您的参考或目标价格进行产品开发
- 按需准备目的地市场所需文件