端部偏置落水口长方形陶瓷台上盆
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
这款长方形陶瓷台上盆将唯一的落水口设在靠近一个短端的位置，盆底为连续的洗涤区。D508 和 D509 共用平整直立的陶瓷盆体、窄开口盆沿和小弧度转角。两份资料均未显示龙头平台或单独的溢流口。两种尺寸保留各自的工厂型号：D508 为 610 × 340 × 110 mm，D509 为 500 × 320 × 120 mm。两款白色盆体均规格为台上安装。落水口偏离中心的位置是其主要的布局特点，具体偏向哪一端取决于原图方向，并未发布左右手安装的专门标注。
适合工程批量采购，也可为 Amazon、Wayfair 等电商平台卖家供货，两种尺寸便于酒店客房与商业空间按台面宽度选配。
Shape & size
Shape and size of D508 / D509
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
-
NO. D508610 × 340 × 110 mm -
NO. D509500 × 320 × 120 mm
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
One floor opening nearer a short end
An offset opening within a continuous rectangular bowl
The floor opening sits away from the middle toward one end. No divider splits the plain inner washing area into separate compartments.
Plain faces and small corner transitions
A narrow open rim above upright outside walls
Straight main sides form the rectangular body with small corner fillets. The outside remains smooth, without ribs or patterned panels.
Read opening position without assigning handedness
Source orientation does not define a left or right installation
The two source views depict the end-offset opening at opposite ends. No direction label defines handed mounting, and rotating the plan preserves the same layout.
D508 and D509 retain their own outside measurements
Choose the Size while preserving its exact factory code
The catalogue specifies above-counter mounting for both sizes. Match the selected code to its own image and native factory drawing, including the different total heights.
D508
610 × 340 × 110 mm
D509
500 × 320 × 120 mm
End-offset rectangular body by original model and Size
- D508 — 610 × 340 × 110 mm
- D509 — 500 × 320 × 120 mm
- Required quantity