矩形三面靠墙按摩浴缸，带头枕，59英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB 6111 是一款白色亚克力矩形三面靠墙按摩浴缸，前侧带裙边，配一个黑色头枕和台面水龙头套件。两个 SKU 尺寸均为1500 × 800 × 680 mm（59 × 31.5 × 26.8英寸）：6111L 和 6111R 分别为左右版本。后侧台面上，出水口和手持花洒位于四个阀门旋钮之间，镀铬扶手弯过前侧缸沿，镀铬毛巾杆沿裙板延伸。6111 通过 cUPC 认证，任一版本的书面报价都可在12个工作小时内回复。
适合工程批量采购，面向公寓、酒店和精装房项目；Amazon、Wayfair 等电商平台卖家也可咨询供货。
更多 三面靠墙浴缸
每款型号 MOQ · 一个40HQ货柜，数量按浴缸尺寸而定
浴缸规格表
尺寸与安装： 6111
以下每个选项均为已量产配置，并拥有独立 SKU。 1 size × 2 hands。 请在每一行采购订单上注明确切的 SKU。
订货编码
| SKU | Size | Hand |
|---|---|---|
| 6111L | 59" x 31" | Left-hand |
| 6111R | 59" x 31" | Right-hand |
同一份采购订单内可接受混合配置订货。请在样品确认前，核对报价单上的 SKU、表面处理和尺寸。 索取完整配置清单.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Whirlpool & Deck
Skirted alcove whirlpool tub with a back-deck faucet set
6111 is a rectangular whirlpool tub for a three-wall alcove, with the finished apron on the open front. The faucet set runs along the back deck, and a single headrest is fitted at one end.
Spout, hand shower and four valve knobs
The back deck holds a spout and a hand shower set between two pairs of valve knobs. Whether this faucet set ships with the tub or is quoted as a separate line is agreed at quotation.
Black headrest, grab handle, apron towel bar
A black headrest on two chrome posts sits at one end. A curved grab handle is mounted on the front rim, and the apron carries a chrome towel bar plus a triple chrome rail at its other end.
Other three-wall options are in the alcove bathtub collection.
Fit & Handing
1500 × 800 mm alcove footprint in L or R
6111 is 1500 mm (59 in) long, 800 mm (31.5 in) wide and 680 mm (26.8 in) high. The L and R SKUs share the same dimensions.
- 6111L
- 59" × 31.5" × 26.8" (1500 × 800 × 680 mm)
- 6111R
- 59" × 31.5" × 26.8" (1500 × 800 × 680 mm)
- Installation
- Alcove, skirted front
- System
- Whirlpool
Pick the L or R version by the plumbing end of the alcove. The drain and whirlpool equipment positions for each version are confirmed on the approved drawing.
Set the tile line against the 680 mm (26.8 in) height shown on the approved drawing.
Construction & Finish
White acrylic shell with chrome fittings
The 6111 shell and apron are formed from pure acrylic sheet in white.
White
One color for both versions
6111 is made in white only, so L and R units in the same order match on site.
The grab handle, towel bar and faucet set are separate chrome fittings. Ask at quotation which of them ship with the tub and how each one is packed.
The chrome towel bar and the triple chrome rail are mounted on the face of the apron and project into the room, so allow for them when setting clearance to a vanity or a door.
Record any transit damage to the apron or rim in writing when the goods arrive.
Compliance
cUPC certification for 6111
Ask for 6111 documents by model, and list the deck faucet set as its own line if it is ordered with the tub.
6111 is cUPC certified. Request the certificate number and its validity before the tub goes into a submittal.
State the destination market in the enquiry, along with any documents needed for the whirlpool pump and controls, and a written reply on 6111 follows within 12 business hours.
Procurement
Ordering 6111 in L and R
6111 comes as two SKUs, 6111L and 6111R. Quantities per version and the scope of the deck fittings are written into the quotation.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Sent within 12 business hours
Give the L and R quantities separately so each is quoted as its own line. Both 6111 versions follow the standard lead time of 30-45 days after sample approval. Private label 6111 orders are handled through the SANIKB OEM and ODM program.
询价时请附上以下信息
- 6111L and 6111R quantities, stated separately
- Destination market, port and electrical supply
- Faucet set, grab handle and towel bar: included or not
- Brand marking on cartons
- Requested shipping window
The 6111 lead time is a planning figure until the quotation confirms it.
我们的工作方式
从询盘到发货
专为进口商、经销商和项目采购方打造的工厂直供流程，中间没有贸易环节。
-
01
发送询盘
请告知型号、数量、目的地市场及品牌或包装要求。提供规格书或图纸会有帮助，但并非开始所必需。
-
02
销售团队与您联系
专属客户经理会通过邮件或 WhatsApp 跟进，确认规格，并在报价前澄清缺失的信息。
-
03
报价
您将收到书面报价单，包含单价、MOQ、包装细节、交期以及您所要求的贸易条款。入门、中端和高端配置可并列报价。
-
04
样品确认
我们提供样品，供您对表面处理、功能和包装签字确认。品牌样品在图稿确认后制作。
-
05
生产与发货
样品确认并支付定金后开始量产。装柜前进行质检和验货，随后按约定发往指定港口。
按您的规格提供 OEM 和 ODM
我们按您的需求书开发。请发送参考型号、图纸，或仅提供目标价格区间和市场，我们将提出合适的方案。入门、中端和高端配置均可由同一工厂提供。
- 产品、纸箱和文件上印制您的标志
- 自有品牌包装和说明书
- 按您的标准匹配定制表面处理
- 在量能支持时提供定制尺寸和模具
- 根据您的参考或目标价格进行产品开发
- 按需准备目的地市场所需文件