大弧度高靠背贵妃独立式浴缸，高31.5英寸，67和71英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8092 是一款亮白亚克力高靠背单侧贵妃独立式浴缸。一端以大弧度升至800 mm（31.5英寸）形成靠背，缸沿向下倾斜至低矮的脚端，排水口位于此处。规格为 D-8092-170，1700 × 800 × 800 mm（67 × 31.5 × 31.5英寸），以及 D-8092-180，1800 × 800 × 800 mm（71 × 31.5 × 31.5英寸），背部高度与浴缸宽度相同。图纸标注内深470 mm（18.5英寸），缸沿不开水龙头孔，需配落地式或壁挂式浴缸水龙头。
D-8092 通过 cUPC 认证；询盘在12个工作小时内获得书面报价。在贵妃浴缸系列中对比各款造型。
本款适合工程批量采购，也可为 Amazon、Wayfair 等电商平台卖家供货，适用于酒店、度假村和住宅开发项目。
更多 贵妃浴缸
每款型号 MOQ · 一个40HQ货柜，数量按浴缸尺寸而定
浴缸规格表
尺寸与安装： D-8092
以下每个选项均为已量产配置，并拥有独立 SKU。 2 sizes。 请在每一行采购订单上注明确切的 SKU。
订货编码
| SKU | Size |
|---|---|
| D-8092-170 | 67" x 31" |
| D-8092-180 | 71" x 31" |
同一份采购订单内可接受混合配置订货。请在样品确认前，核对报价单上的 SKU、表面处理和尺寸。 索取完整配置清单.
对比 · 2 sizes
Size & spec comparison
| 67" x 31"D-8092-170 | 71" x 31"D-8092-180 | |
|---|---|---|
| 整体 长×宽×深 | 67″ × 31.5″ × 31.5″ 1700 × 800 × 800 mm | 71″ × 31.5″ × 31.5″ 1800 × 800 × 800 mm |
上述通用规格适用于所有尺寸；表格仅对比随尺寸变化的项目。OEM/ODM 可定制尺寸。
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Profile & Backrest
800 mm backrest sweeping down to a low foot end
D-8092 is a single slipper with an asymmetric egg plan. The backrest end rises to 800 mm and the rim falls away toward the foot end.
Tall sweep at one end
The raised end lifts the backrest to 800 mm (31.5 in), which gives a reclining bather a tall surface to lean against.
Drain 370 mm from the foot end
The drawing places the drain 370 mm (14.6 in) in from the low end and 400 mm (15.7 in) from the side, which puts it on the center line of the 800 mm width.
Deep soaking tubs at other heights are grouped in the soaking tub collection.
Fit & Drawing
67 in or 71 in long, 800 mm wide and tall
Both sizes are 800 mm (31.5 in) wide and 800 mm high at the backrest. The lengths are 1700 mm and 1800 mm.
- D-8092-170
- 67" × 31.5" × 31.5" (1700 × 800 × 800 mm)
- D-8092-180
- 71" × 31.5" × 31.5" (1800 × 800 × 800 mm)
- Installation
- Freestanding, flat to floor
- Drain Position
- 370 mm from low end, 400 mm from side
Allow for the filler at the foot end when checking room length: the rim has no tap holes, so the filler is floor-standing or wall-mounted, and the drain sits 370 mm from that end.
Set the floor waste from the drain dimensions on the approved drawing.
Construction & Finish
Gloss white pure acrylic, tapered body
The D-8092 shell is gloss white pure acrylic sheet; the rim is slim and the body tapers to a flat footprint.
White
White across both lengths
D-8092 is made in gloss white for the 67 in and 71 in sizes alike.
At 800 mm, the backrest end stands above the rest of the rim. Confirm how the carton supports it and how many cartons may be stacked.
Settle the inspection and replacement terms for transit damage before the order ships.
Check the backrest edge and the gloss surface when cartons are opened.
Compliance
cUPC certification for D-8092
Store the approved D-8092 drawing with the certificate so installers can set the drain from it.
D-8092 is cUPC certified. The certificate number and its validity can be supplied for D-8092-170 and D-8092-180 on request.
Name the destination country when you inquire, and a written reply will reach you within 12 business hours.
Procurement
Ordering D-8092
The 1700 mm and 1800 mm sizes are quoted separately; the standard lead time for either is 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- within 12 business hours
An approved sample confirms the backrest height and drain position before production, which matters when the floor waste is set before the tubs arrive.
询价时请附上以下信息
- Quantities for D-8092-170 and D-8092-180
- Faucet type: floor-mounted or wall-mounted
- Drain and overflow trim finish for D-8092
- Destination market and port
- Private-label marking
- Requested shipping window
Lead time counts from sample approval and stays indicative until the quote is issued.
我们的工作方式
从询盘到发货
专为进口商、经销商和项目采购方打造的工厂直供流程，中间没有贸易环节。
-
01
发送询盘
请告知型号、数量、目的地市场及品牌或包装要求。提供规格书或图纸会有帮助，但并非开始所必需。
-
02
销售团队与您联系
专属客户经理会通过邮件或 WhatsApp 跟进，确认规格，并在报价前澄清缺失的信息。
-
03
报价
您将收到书面报价单，包含单价、MOQ、包装细节、交期以及您所要求的贸易条款。入门、中端和高端配置可并列报价。
-
04
样品确认
我们提供样品，供您对表面处理、功能和包装签字确认。品牌样品在图稿确认后制作。
-
05
生产与发货
样品确认并支付定金后开始量产。装柜前进行质检和验货，随后按约定发往指定港口。
按您的规格提供 OEM 和 ODM
我们按您的需求书开发。请发送参考型号、图纸，或仅提供目标价格区间和市场，我们将提出合适的方案。入门、中端和高端配置均可由同一工厂提供。
- 产品、纸箱和文件上印制您的标志
- 自有品牌包装和说明书
- 按您的标准匹配定制表面处理
- 在量能支持时提供定制尺寸和模具
- 根据您的参考或目标价格进行产品开发
- 按需准备目的地市场所需文件