独立式按摩贵妃浴缸，缸沿台面开水龙头孔，67英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT022 是一款白色亚克力独立式按摩贵妃浴缸，靠背高耸，缸壁外扩，缸体内设按摩喷嘴。水龙头孔位于低端的缸沿台面，图中配有台面式出水口、手持花洒、三个手柄和一个圆形按钮；水龙头套件是否随附，以报价时约定为准。仅一个规格，FT022，1700 × 750 × 750 mm（67 × 29.5 × 29.5英寸），底部平放于地面。FT022 通过 cUPC 认证，12个工作小时内发出报价。
其他按摩款式见SANIKB 按摩浴缸。
按摩款适合工程批量采购，也可为Amazon、Wayfair等电商平台卖家供货，适用于度假村和酒店套房项目。
更多 按摩浴缸
每款型号 MOQ · 一个40HQ货柜，数量按浴缸尺寸而定
浴缸规格表
尺寸与安装： FT022
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Jets & Tap Set
Whirlpool jets and a drilled rim deck
FT022 combines a single slipper profile with whirlpool jets. The backrest end rises tall, the sides flare outward, and the faucet holes are in the rim deck at the low end.
Jet nozzles in the shell
Massage jet nozzles are set into the acrylic shell. The jet layout and the whirlpool system specification are provided with the quotation.
Faucet holes in the low-end rim
The faucet holes are drilled in the low-end rim deck, so the spout, levers and controls sit on the tub itself and no floor filler is needed. The hole layout is confirmed on the approved drawing.
Raised-back profiles without jets are in the slipper tub collection.
Fit & Services
750 mm wide, 750 mm tall at the back
Length is 1700 mm (67 in) on FT022; width and backrest height are both 750 mm (29.5 in).
- FT022
- 67" × 29.5" × 29.5" (1700 × 750 × 750 mm)
- Faucet Mount
- Deck-mounted; faucet holes in low-end rim
- Hydro
- Whirlpool
- Base
- Flat to floor
Hot and cold supplies run up to the rim deck rather than to a floor filler, and the whirlpool system needs a power supply. Get both service positions on the approved drawing before the floor and wall are finished.
Supply, waste and power positions for FT022 are taken from the approved drawing.
Material & Color
White acrylic with flared sides
FT022 is formed from pure acrylic sheet in white, with a slim rim and sides that flare outward from a flat base.
White
White shell, drilled deck
The shell is made in white. If the tap set is ordered with the tub, its finish is agreed at quotation and checked on the approval sample.
Jet fittings, plus a tap set where one is ordered, give FT022 more parts to protect than a plain shell. Ask how the nozzles and any taps are packed, and whether any travel loose.
Open and check the jet fittings, and any tap set, before the delivery is signed off.
Compliance
cUPC certification for FT022
Name the whirlpool system and the tap set in the document request so each part of FT022 is covered.
FT022 is cUPC certified. Request the certificate reference for FT022, and ask which documents cover the whirlpool system and the tap set.
Include the destination market with the enquiry, since electrical and plumbing requirements differ by market. Replies are issued within 12 business hours.
Procurement
Ordering FT022
FT022 is made in one size. Whether the tap set is supplied, and what the whirlpool system includes, is agreed at quotation.
- Hydro
- Whirlpool
- Standard Lead Time
- 30-45 days after sample approval
Lead time is 30-45 days after sample approval. State the destination market and its supply voltage in the enquiry so the whirlpool specification can be checked against it.
询价时请附上以下信息
- Quantity of FT022
- Destination market and supply voltage
- Tap set required or not, and its finish
- Whirlpool system specification required
- Port of discharge
- Carton marking and shipping window
Electrical details for the whirlpool system are confirmed on the quotation.
我们的工作方式
从询盘到发货
专为进口商、经销商和项目采购方打造的工厂直供流程，中间没有贸易环节。
-
01
发送询盘
请告知型号、数量、目的地市场及品牌或包装要求。提供规格书或图纸会有帮助，但并非开始所必需。
-
02
销售团队与您联系
专属客户经理会通过邮件或 WhatsApp 跟进，确认规格，并在报价前澄清缺失的信息。
-
03
报价
您将收到书面报价单，包含单价、MOQ、包装细节、交期以及您所要求的贸易条款。入门、中端和高端配置可并列报价。
-
04
样品确认
我们提供样品，供您对表面处理、功能和包装签字确认。品牌样品在图稿确认后制作。
-
05
生产与发货
样品确认并支付定金后开始量产。装柜前进行质检和验货，随后按约定发往指定港口。
按您的规格提供 OEM 和 ODM
我们按您的需求书开发。请发送参考型号、图纸，或仅提供目标价格区间和市场，我们将提出合适的方案。入门、中端和高端配置均可由同一工厂提供。
- 产品、纸箱和文件上印制您的标志
- 自有品牌包装和说明书
- 按您的标准匹配定制表面处理
- 在量能支持时提供定制尺寸和模具
- 根据您的参考或目标价格进行产品开发
- 按需准备目的地市场所需文件