蛋形贵妃独立式浴缸，斜缸沿，59和67英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8350 是一款白色蛋形单侧贵妃式亚克力独立式浴缸。缸沿自狭窄的排水端600 mm（23.6英寸）升至宽阔的靠背端650 mm（25.6英寸）。两种规格宽度均为800 mm：D-8350-150 为1500 × 800 × 650 mm（59 × 31.5 × 25.6英寸），D-8350-170 为1700 × 800 × 650 mm（67 × 31.5 × 25.6英寸）。侧壁向较小的平底收窄，缸沿不开水龙头孔，需配落地式或壁挂式浴缸水龙头。
D-8350 通过 cUPC 认证；提交报价申请，12个工作小时内即可收到回复。相关款式见贵妃浴缸系列。
本款适合工程批量采购，并可为 Amazon、Wayfair 等电商平台卖家供货，适用于酒店、公寓和住宅开发项目。
More in 贵妃浴缸
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8350
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8350-150 | 59" x 31" |
| D-8350-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 31"D-8350-150 | 67" x 31"D-8350-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 25.6″ 1500 × 800 × 650 mm | 67″ × 31.5″ × 25.6″ 1700 × 800 × 650 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Plan & Profile
Broad backrest end, narrow drain end
The drawing shows an asymmetric egg plan: one end is broad and round, the other narrows to a point. The rim slopes from 650 mm at the broad end down to 600 mm at the narrow end.
Egg outline with no flat side
No side of the tub is straight, so D-8350 is meant to stand away from the walls. The broad end, where the rim is highest, gives room for the shoulders.
Drain and overflow at the narrow end
The drain and overflow are placed at the narrow, lower end, away from the backrest. Plan the floor waste and a floor-mounted filler around that end.
Other deep soaking profiles can be compared in the soaking tub range.
Fit & Drawing
800 mm wide, 59 in or 67 in long
Both SKUs are 800 mm (31.5 in) wide with a 650 mm (25.6 in) high end and a 600 mm (23.6 in) low end. The length is 1500 or 1700 mm.
- D-8350-150
- 59" × 31.5" × 25.6" (1500 × 800 × 650 mm)
- D-8350-170
- 67" × 31.5" × 25.6" (1700 × 800 × 650 mm)
- Installation
- Freestanding, flat to floor
- Faucet Mounting
- No tap holes; floor-standing or wall-mounted filler
Inside, the well is 455 mm and 470 mm deep (17.9 and 18.5 in) on the dimension drawing. The drain sits at the narrow end, so the floor waste goes under the low end of the rim.
Read the inner depths off the approved drawing for the chosen size before specifying.
Construction & Finish
White pure acrylic with a thin rim
D-8350 is made from pure acrylic sheet in white, and the thin rim follows the slope from end to end.
White
Sheen agreed on the sample
D-8350 is made in white; the surface finish is agreed on the approved sample, which then serves as the reference for production.
The pointed narrow end and the sloped rim are the edges most likely to be knocked in handling. Ask how both are padded in the carton.
Put the arrival inspection and replacement arrangements for damaged tubs into the purchase terms.
Open and inspect cartons before the delivery is signed off where possible.
Compliance
cUPC certification for D-8350
Keeping the D-8350 dimension drawing beside the certificate means installers work from the same figures as the approval file.
D-8350 is cUPC certified. Before submittal, ask for the certificate number, its validity and the dimension drawing for D-8350-150 and D-8350-170 in one pack.
Let us know the market the tubs are going to, and we will answer in writing within 12 business hours.
Procurement
Ordering D-8350
The two D-8350 sizes are quoted line by line, and the 1500 mm and 1700 mm units share a lead time of 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- within 12 business hours
Use the sample to check the slope from the 650 mm end to the 600 mm end against the bathroom elevation before production starts.
Include these details with the RFQ
- Quantities for D-8350-150 and D-8350-170
- Floor or wall faucet location
- Drain and overflow trim
- Destination market and port
- Brand marking and carton labels
- Requested shipping window for D-8350
Until a quotation is issued, read the lead time as a guide.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request