不等宽 13 + 10-3/8 双槽吧台用台下厨房水槽，26-5/8 x 18
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
6745A-L 适合吧台或备餐位，两个槽宽不同，分别为 13 × 16 英寸和 10-3/8 × 16 英寸，台下厨房水槽本体 26-5/8 × 18 英寸，采用拉丝缎面 304 不锈钢。
可选 16G 或 18G 板厚，槽深 6、7、8 或 9 英寸。排水口 3-1/2 英寸。本型号通过 cUPC 认证，佛山工厂直供，MOQ 50 件。
适合酒店和餐饮项目吧台的工程批量采购；可为 Amazon、Wayfair 等电商平台卖家供货。
More in 台下厨房水槽
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Dimension sheet
Sizes and cut data for 6745A-L
small Bowl Size: 10-3/8" X 16"
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
BAR AND PREP RUNS
Fitting an unequal twin bowl undermount bar sink
Planning starts with the cabinet run. 6745A-L measures 26-5/8 × 18 inches overall, a compact footprint for bar, prep and island positions. Among bar sinks and prep sinks, this twin bowl body is built for tight runs where counter space is limited.
Large bowl, 13 × 16
Bigger of the two, this bowl is 13 inches wide and 16 inches front to back. It takes the main washing and prep work.
Small bowl, 10-3/8 × 16
Narrower at 10-3/8 inches, the second bowl keeps the same 16 inches front to back and handles rinsing beside the main bowl.
Drain, 3-1/2 inch
A 3-1/2 inch drain opening sets the plumbing. Plan the waste connections for both bowls and the space they need under the cabinet.
6745A-L DATA
Sizes, depths and stainless steel construction
- Model
- 6745A-L
- Overall size
- 26.6" × 18.0" (676 × 457 mm)
- Big bowl
- 13" × 16"
- Small bowl
- 10-3/8" × 16"
- Bowl depths
- 6" / 7" / 8" / 9"
- Drain opening
- 3-1/2"
- Gauge
- 16G (1.5 mm) / 18G (1.2 mm)
- Material
- 304 stainless steel
- Finish
- Brushed Satin
- Mount
- Undermount
ORIENTATION AND DEPTH
Choosing hand, depth and gauge for bar prep sinks
Part of the model code 6745A-L, the L matters. Confirm which bowl sits on which side from the spec sheet before the cabinet is cut.
For a bar prep layout, pick a depth of 6, 7, 8 or 9 inches against the drain assembly, the pipework and the service space below a compact position. A shallow bowl gives more room under the sink, while a deep bowl holds more.
Gauge is a choice between 16G (1.5 mm) and 18G (1.2 mm). State both gauge and depth in the quotation and drawing approval so every line matches.
BUILD DETAIL
Padding, finish and tooled builds on 6745A-L
Noise-reduction padding
Padding is attached to the underside of the sink to cut noise from the stainless steel bowls, a useful detail on prep sinks used beside seating.
Brushed satin finish
Brushed satin runs across the 304 stainless steel body of this stainless steel bar sink, in 16G (1.5 mm) or 18G (1.2 mm).
All builds tooled
Both gauges and all four bowl depths of 6, 7, 8 and 9 inches are tooled for this model, so mixed lines are possible.
COMPLIANCE
cUPC certification and the spec sheet
Request the spec sheet and the current certification documents with the RFQ.
6745A-L carries cUPC certification, and a spec sheet is available for the model. Ask for both with the quotation so the submittal matches your destination market.
MOQ AND OEM
MOQ and container terms for prep sinks and bar sinks
Minimum quantity per code: 50 pcs, mixed prep sinks bar programs included. Send model, gauge, depth and quantity per line and SANIKB, a factory in Foshan, replies within 12 business hours.
Brand-led programs can read the OEM and ODM service page, then send logo files and carton requirements together with the model code.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request