首页›水槽›浴室› 陶瓷台盆› D435
SANIKB D435 ceramic basin sceneSANIKB D436 ceramic basin sceneSANIKB D437 ceramic basin scene
01 / 03

弧形侧壁曲线底陶瓷台上盆

SKU D435
Size
起订量
20 ft / 40 ft containersBelow 1 container: your own China forwarder required.
交期
Confirm in quotation
回复时间
1个工作日
材质 陶瓷
类型 Ceramic Countertop Basin
尺寸 500 × 390 × 145 mm
安装方式 台上式
表面处理
White
产品 PDF D435

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.

这一系列白色陶瓷台上盆,侧壁微微外弧,转角圆润。光滑的下壁向内弧收至窄而平的底部,上方是平整的敞口盆沿。

共三种长度,适配不同的浴室柜台面,从 500 mm 的 D435 到 700 mm 的 D437。每个盆均设一个排水口,整个系列的弧形外轮廓保持一致。

三种长度便于同一项目统一外观,适合住宅开发、精装房和酒店的工程批量采购;也可为 Amazon、Wayfair 等电商平台卖家供货。

产品 PDF D435

形状与尺寸

外形与尺寸: D435

以下每个选项均为已量产配置,并拥有独立 SKU。 3 sizes。 请在每一行采购订单上注明确切的 SKU。

SANIKB D435 ceramic basin scene
尺寸500 × 390 × 145 mm / 600 × 380 × 145 mm / 700 × 380 × 145 mm
尺寸500 × 390 × 145 mm600 × 380 × 145 mm700 × 380 × 145 mm
安装方式台上式
颜色 White
材质陶瓷
  • 500 × 390 × 145 mm NO. D435500 × 390 × 145 mm
  • 600 × 380 × 145 mm NO. D436600 × 380 × 145 mm
  • 700 × 380 × 145 mm NO. D437700 × 380 × 145 mm

同一份采购订单内可接受混合配置订货。请在样品确认前,核对报价单上的 SKU、表面处理和尺寸。 索取完整配置清单.

MOQ FIRST

Bowed-side ceramic vessel with a curved underside

MOQ and lead time for D435, D436 and D437 are confirmed in the quotation, so a mixed-size order can be planned in a single enquiry.

Bowed sides

Four gently bowed middle stretches connect broad rounded corner transitions around the plan.

Curved underside

Smooth lower walls curve inward toward a narrower flat boundary.

Plain open rim

The rim follows the curved outline and carries no tap platform.

Unbroken floor

The bowl floor stays smooth apart from one drain opening.

THREE CODES

D435, D436 and D437 size schedule

D435
500 × 390 × 145 mm
D436
600 × 380 × 145 mm
D437
700 × 380 × 145 mm
Outside height
145 mm, all models
Installation
Above-counter
Finish
White
Material
Ceramic
Tap platform
None on the basin

USE CASES

Matching codes to vanity widths

D435 is the short bowl at 500 mm, suited to cloakroom-size counters. D436 and D437 move up to 600 mm and 700 mm for standard and long vanities.

Depth is 390 mm on D435 and 380 mm on the other two, and all three stand 145 mm high.

A project can therefore stock one height and one look, and only the counter length decides which of the three codes goes into each room.

Specifiers can lean on one family for cloakrooms, guest baths and master vanities, which keeps the bowed outline consistent from room to room.

SEND US

Enquiry details for D435 to D437

Quote checklist

  • Codes D435, D436 or D437, with a quantity for each
  • Destination port or country
  • Tap type for the counter or wall
  • Label or carton needs for private label supply
  • Whether you need the three codes quoted as one mixed shipment