黑色外壳白色内胆贵妃浸泡式独立式浴缸，底座围边，67英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8075WB 是一款单端贵妃浸泡式独立式浴缸，外壳哑光黑，内胆和纤薄缸沿为白色，落地处有一圈低矮的底座围边。一端升起作靠背，缸沿向下水口一端逐渐降低。仅一个规格，D-8075WB-170，尺寸 1700 × 800 × 680 mm（67 × 31.5 × 26.8英寸）。缸沿无水龙头孔，D-8075WB 须配落地式或壁挂式水龙头。D-8075WB 通过 cUPC 认证，SANIKB 在12个工作小时内回复项目报价。
其他黑色外壳型号见黑色浴缸系列。
黑色外壳款适合工程批量采购，并可为Amazon、Wayfair等电商平台卖家供货，适用于度假村和精品酒店项目。
More in 黑色浴缸
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8075WB
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Color & Profile
Matte black shell, white bathing surface
D-8075WB pairs a matte black exterior with a white interior and a slim white rim. The profile is a single slipper: one end climbs to 680 mm (26.8 in) and the rim slopes down to the other.
White rim line against black
The slim white rim traces the top edge of the black body, so the slope from backrest to foot end shows as a white line.
Low foot band at the floor
The body finishes in a low band where it meets the floor, a plinth base rather than feet, which gives the black shell a defined edge at floor level.
Slipper profiles in white and in color are grouped in the slipper tub collection.
Fit & Drawing
1700 × 800 mm, 680 mm at the backrest
The single SKU, D-8075WB-170, measures 67 by 31.5 by 26.8 inches (1700 by 800 by 680 mm). Its drawing places the drain 320 mm (12.6 in) from the low end and 400 mm (15.7 in) from the side.
- D-8075WB-170
- 67" × 31.5" × 26.8" (1700 × 800 × 680 mm)
- Base
- Plinth band at floor level
- Inner Depth
- 475 / 490 mm (18.7 / 19.3 in) on drawing
- Faucet Mount
- Floor-standing filler or wall spout
Because D-8075WB stands on a plinth band rather than on feet, the floor under it needs to be flat and level across the whole footprint.
Fix the waste position from the approved D-8075WB drawing.
Material & Finish
Matte black exterior on pure acrylic sheet
D-8075WB is formed from pure acrylic sheet. The outside is finished in matte black, and the interior and rim are white.
Black exterior with white interior
Two finishes, one shell
The black exterior and the white interior and rim are fixed on the approved sample. Hold that sample as the reference for every unit in the order.
Handling marks are easy to see on a dark exterior. Ask how the black surface is wrapped and how the plinth edge is protected in the carton.
Inspect the black exterior in daylight when the cartons are opened.
Compliance
cUPC certification for D-8075WB
D-8075WB has a black exterior, so put the model number and the finish on the purchase order and on each document request.
D-8075WB is cUPC certified. For a submittal, ask for the certificate reference and validity date issued against D-8075WB-170.
Name the destination market when you write in, and an answer comes back within 12 business hours.
Procurement
Ordering D-8075WB
D-8075WB-170 is the only SKU, and SANIKB builds it to a standard lead time of 30-45 days after sample approval.
- Finish
- Matte black exterior, white interior
- Standard Lead Time
- 30-45 days after sample approval
The exterior tone and the white rim line are both set by the approved sample, so sign it off before production starts.
Include these details with the RFQ
- Quantity of D-8075WB-170
- Floor filler or wall spout, and its finish
- Waste fitting color to suit the black exterior
- Destination market and port
- Private-label marking
- Target shipping date
Keep the approved two-tone sample on file for incoming inspection.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request