The Lotus White finish is paired with a The Liu Jin Stone surface. The source's cabinet front includes a distinctive circular display feature. The NB-3040 cabinet material is stainless steel. Its 1 configuration uses Liu Jin Stone at the basin surface. Each complete factory model identifies a particular cabinet and mirror combination. The floating arrangement shown here leaves the floor visible beneath the unit.
The listed basin arrangement is a stone basin named Liu Jin; its listed color is Matte Apricot Grey. Its surface category is Liu Jin Stone, distinct from the cabinet finish. For NB-3040-120, the remaining main-cabinet measures are 500 and 480, with the source unit printed as mm. The selected surface name appears in the component schedule below. Package contents and the supplied faucet or drain should be agreed in the quotation.
FORM & FINISH
Lotus White is paired with the named fine steel-sand treatment. Finish selection is separate from the stainless-steel body specification. NB-3040-120 carries a first listed cabinet measure of 1200 mm. Use that model reference when comparing a finish sample with the photographed cabinet. A veneer or woodgrain label identifies the named treatment; it does not turn the cabinet specification into solid wood.
BASIN & COUNTERTOP
The listed basin arrangement is a stone basin named Liu Jin; its listed color is Matte Apricot Grey. Its surface category is Liu Jin Stone, distinct from the cabinet finish. For NB-3040-120, the remaining main-cabinet measures are 500 and 480, with the source unit printed as mm. The selected surface name appears in the component schedule below. Package contents and the supplied faucet or drain should be agreed in the quotation.
MODEL CONFIGURATIONS
The configuration schedule contains 1 original model code: NB-3040-120 — first cabinet measure 1200 mm. The 1200 model lists an 1180 by 180 by 850 mirror cabinet and a 1200 by 500 by 480 main cabinet. Read the model-specific component rows before finalizing the cabinet arrangement.
COMPONENT PLANNING
The mirror cabinet for NB-3040-120 has the listed sequence 1180 × 180 × 850 mm. The dimension order follows the catalog rather than a newly assigned set of axes. The main cabinet in this configuration has 3 printed measures, so the mirror entry must be considered separately. Confirm installation requirements and the electrical specification where relevant to the chosen model.
CABINET DETAILS
The main scene is supported by separate open-cabinet and mirror-cabinet views. Those images show the layout without establishing electrical functions or supplied accessories. The alternative photograph helps review the front treatment and the arrangement of the basin surface. Decorative items shown in that view are styling references. Use the actual component specification to decide what is required for the project quotation.
Fine Steel-Sand Lotus White Vanity Finish describes the specified appearance rather than a change to the cabinet body. NB-3040 retains the catalog's stainless-steel material designation. The mirror cabinet entry for NB-3040-120 starts at 1180 mm. A coordinated finish choice should therefore consider the cabinet face and the separate mirror composition. Keep color codes and veneer descriptions on the finish schedule, and request the named treatment against the full model identity.
Liu Jin Stone Basin In Matte Apricot Grey Countertop is the named surface choice for NB-3040. This family has 1 printed model, and its reference cabinet sequence includes 500 as the second value. Surface selection must also account for the documented basin arrangement. A decorative-stone trade name does not establish an unprinted geological grade, while a slab label should not be silently rewritten as marble. Keep the material wording specific to the model when preparing the project quotation.
1200 Mm Cabinet And Mirror Coordination is a component-matching task, not a comparison of room-image scale. The first two mirror values are 1180 and 180 mm. A third figure, 850 mm, is printed separately in the same sequence. The component list separates the lower cabinet from the mirror assembly. The model count for NB-3040 is 1; use the selected code to find its own dimensional row. Cabinet changes can affect the upper composition, even when two pictures share a finish. Establish the final installation requirements with the complete cabinet and mirror specification.
