Rectangular Glass Vessel Bathroom Sink GL018 — SANIKBSANIKB GL018 dimension drawing
01 / 02

GL018 مغسلة زجاجية علوية (فوق السطح) رمادية فحمية

SKU GL018
الشهادات
cUPC
الحد الأدنى للطلب
20 قطعة
مدة التسليم
30–45 يومًا بعد اعتماد العيّنة
مدة الرد
12 ساعة عمل
الخامة زجاج مقسّى
المقاس 460 × 330 × 100 مم (السماكة 12 مم) مقاسات حسب الطلب
تركيب مغسلة علوية فوق السطح
الحجم (CBM) 0.04 m³
الوزن الصافي 6.3 كجم
الوزن الإجمالي 7.8 كجم
ملف PDF للمنتج GL018

SANIKB GL018 هي مغسلة زجاجية علوية (فوق السطح) بلون رمادي فحمي مصنوعة لتخطيطات وحدات مغاسل الحمام فوق سطح العمل التي تحتاج إلى مغسلة أغمق دون مظهر أسود صلب مسطح. يستخدم الطراز سطحاً زجاجياً رمادياً فحمياً بملمس، وحوضاً مستطيلاً مستدير الحواف، ومقاس 460 × 330 × 100 مم. وبالمقارنة مع الأحواض الزجاجية المستديرة المدمجة، يمنح GL018 الوحدة حضوراً أفقياً أوسع مع إبقاء الزوايا ناعمة بصرياً. ينبغي للمشترين تحديد GL018 بملمسه الرمادي الفحمي وهيكله من زجاج مقسّى بسماكة 12 مم ومتطلبات التركيب العلوي.

ملف PDF للمنتج GL018

المزيد في مغسلة زجاجية علوية

امزج أي طرازات في حاوية 20 قدم واحدة · بدون حد أدنى لكل طراز

عرض الكل 43

أرسل مواصفاتك. واحصل على حقيقية عرض سعر خلال 12 ساعة عمل.

مراجعة هندسية. جاهز لـ cUPC · CE · ISO 9001. مدة التسليم 30–45 يومًا، FOB أو CIF.

عرض سعر مفصّل واحد — وليس خمسة
تم التحقق من الجدوى والاعتماد لكل سوق
Have a spec file? Attach it to your inquiry below.
— ملخص المشروع للشركات (B2B) فقط
استفسار عن GL018 مغسلة زجاجية علوية (فوق السطح) رمادية فحمية SKU GL018
يرجى إدخال اسمك الأول.
يرجى إدخال اسم شركتك.
يرجى إدخال بريد إلكتروني صالح.
يرجى إدخال رقم هاتفك.
اسحب وأفلت أو تصفّح PDF / IMG / XLS · الحد الأقصى 4MB ×3
    رد المهندس خلال 12 ساعة عمل

    12 عامًا متتاليًا في KBIS وIBS.

    — الأحدث
    فبراير 2026 KBIS· أورلاندو، الولايات المتحدة
    مارس 2026 إكسبو ريفيستير· ساو باولو، البرازيل
    6 معارض دولية سنويًا
    2026 إكسبو ريفيستير

    2026إكسبو ريفيستير

    ساو باولو، البرازيل
    2026 KBIS

    2026KBIS

    Orlando, Florida
    2025 KBIS

    2025KBIS

    لاس فيغاس، الولايات المتحدة
    2025 الـ 5 الكبار

    2025الـ 5 الكبار

    دبي، الإمارات العربية المتحدة
    2024 IBS

    2024IBS

    Las Vegas, Nevada, USA
    2024 إكسبو غوادالاخارا

    2024إكسبو غوادالاخارا

    غوادالاخارا، المكسيك
    2023 معرض كانتون

    2023معرض كانتون

    قوانغتشو، الصين
    2019 سيرسايي

    2019سيرسايي

    بولونيا، إيطاليا
    2019 ISH

    2019ISH

    فرانكفورت، ألمانيا
    2017 الـ 5 الكبار

    2017الـ 5 الكبار

    دبي، الإمارات العربية المتحدة
    2014 KBIS

    2014KBIS

    لاس فيغاس — الظهور الأول في الولايات المتحدة
    2013 BAU

    2013BAU

    ميونخ، ألمانيا

    وثائق المصنع

    يعتمد نطاق الشهادات على الطراز المختار وسوق الوجهة. اطلب الوثائق الخاصة بالطراز مع عرض السعر.

    شهادة IAPMO cUPC
    شهادة نظام إدارة الجودة ISO 9001
    شهادة المنتج المعتمد من WRAS
    شهادة إدراج IAPMO
    شهادة الفحص الفني CE من UDEM
    SANIKB GL018

    GL018 Charcoal Gray Texture Without a Flat Black-Glass Look

    GL018 should be specified as charcoal gray textured glass, not as a plain black glass sink. Its layered surface gives the bowl more depth and variation than a flat tinted basin, while the darker tone keeps the vanity visually grounded without the fully opaque appearance of black ceramic.

    Dark gray glass with visible surface movement.

    The charcoal gray appearance can coordinate with stone-look counters, wood vanities, matte black fixtures, chrome, or brushed nickel hardware. Color expectation should still be reviewed under the project’s actual lighting, countertop color, wall finish, and faucet finish.

    GL018 Model focus
    Charcoal Textured gray glass
    Not flat black Key visual boundary
    01

    460 × 330 mm Rounded Rectangle for Wider Vanity Presence

    GL018 uses a rectangular bowl with rounded corners. The 460 × 330 mm footprint gives it more horizontal coverage than many round vessel sinks, while the softened corners keep the basin from looking too sharp or box-like.

    Because GL018 is an above-counter vessel sink, the bowl remains fully visible on the countertop. Its size, color, drain position, and faucet placement should be planned together rather than treated as separate components.

    • Check countertop width and front-to-back depth before confirming the layout.
    • Review backsplash or wall clearance, especially when using a deck-mounted faucet.
    • Confirm the drain-hole placement against the bowl position and plumbing below the counter.
    • Leave enough surrounding counter space for daily-use items and faucet operation.

    Layout Snapshot

    Length
    460 mm
    Depth
    330 mm
    Height
    100 mm
    Mount
    Above-counter
    02

    12 mm Tempered Glass as a Visible GL018 Specification

    GL018 is made from 12 mm tempered glass. The glass thickness is part of the model’s specification and is visible at the rim and bowl wall, giving the rectangular form a more substantial visual profile than thinner-looking glass basins.

    This material point also helps buyers separate GL018 from ceramic, stone, acrylic, or other sink categories. GL018 should be selected for its glass surface, charcoal gray color depth, textured appearance, and above-counter presentation.

    Material Notes

    Material
    Tempered glass
    Thickness
    12 mm
    Surface
    Textured gray
    Shape
    Rounded rectangle
    03

    Best Vanity Settings for GL018’s Charcoal Gray Texture

    GL018 works best when the vanity design needs a darker focal point with visible surface movement. It is especially useful where a clear glass bowl would look too light, but a solid black basin would feel too heavy.

    01

    Wood Vanity Tops

    Charcoal gray glass creates contrast against warm cabinet tones without adding a bright color.

    02

    Stone-Look Counters

    The textured surface can coordinate with gray, beige, concrete-style, or lightly veined countertops.

    03

    Matte Black Fixtures

    The dark gray bowl supports a black hardware package without becoming a plain black block.

    04

    Wider Vanity Layouts

    The 460 mm rectangular width gives more horizontal presence than compact round bowls.

    05

    Feature Powder Rooms

    The textured glass surface adds detail without using a strong red, blue, green, or artistic pattern.

    For very small or low-light bathrooms, confirm whether the darker charcoal gray tone fits the intended space before final specification.
    04

    Faucet, Drain, and Countertop Checks Before Ordering GL018

    GL018 has a 100 mm bowl height, so faucet selection must be checked before purchase. The faucet should clear the rim and have enough spout reach to direct water into the basin properly.

    Faucet height Confirm clearance above the 100 mm vessel bowl before approving the faucet.
    Spout reach Make sure the water stream lands inside the rectangular basin, not too close to the rim.
    Drain compatibility Confirm the required drain type before ordering or preparing the countertop.
    Countertop hole planning Verify drain-hole position for above-counter vessel installation.
    Vanity depth Check the 330 mm bowl depth against usable counter space and wall clearance.
    Accessory configuration Confirm faucet, drain, and mounting items in the final quotation or order sheet.
    The GL018 specification focuses on the sink body, material, size, and mounting type. Accessories should not be assumed unless listed in the final order configuration.
    05

    GL018 Compared With Lighter, Frosted, and Smoked Glass Options

    GL018 should not be selected only because it is dark or rectangular. Its main difference is the combination of charcoal gray textured glass, rounded rectangular shape, and 460 × 330 × 100 mm above-counter format.

    Clear

    Compared With Clear Glass

    Clear glass looks lighter and more transparent. GL018 has a darker textured gray surface for stronger vanity contrast.

    View GL010 clear glass bowl
    Frosted

    Compared With Frosted Glass

    Frosted glass gives a softer, more diffused look. GL018 has stronger surface contrast and visible charcoal gray texture.

    View GL024 frosted glass bowl
    Smoked

    Compared With Transparent Black

    Transparent black glass emphasizes smoky translucency. GL018 is defined more by gray texture and layered surface movement.

    View GL004 smoked black bowl
    Stone Texture

    Compared With Black Stone Texture

    Stone-texture black glass reads heavier and more stone-like. GL018 keeps a charcoal gray glass identity.

    View GL017 stone-texture bowl
    Rectangular

    Compared With Other Rectangular Glass

    Other rectangular glass bowls may be specified by size or shape alone. GL018 is more specific: charcoal gray texture plus a rounded rectangular body.

    View GL015 rectangular bowl
    Use GL018 when the project needs a darker glass vessel sink with more texture than clear, frosted, or smoked glass, but without the heavier look of a stone-texture black basin.

    كيف نعمل

    من الاستفسار إلى الشحن

    عملية مباشرة من المصنع مصمّمة للمستوردين والموزّعين ومشتري المشاريع. بلا طبقة تجارية وسيطة.

    1. 01

      أرسل الاستفسار

      أخبرونا بالطراز والكمية وسوق الوجهة وأي متطلبات للعلامة التجارية أو التغليف. ورقة المواصفات أو الرسم مفيدة لكنها ليست شرطًا للبدء.

      تم الرد خلال 12 ساعة عمل
    2. 02

      يتواصل معك فريق المبيعات لدينا

      يتابع مدير حساب مُسمّى عبر البريد الإلكتروني أو WhatsApp، ويؤكد المواصفات ويوضّح أي نقص قبل التسعير.

      البريد الإلكتروني أو WhatsApp
    3. 03

      عرض السعر

      تتلقى عرض سعر مكتوبًا يتضمن سعر الوحدة والحد الأدنى للطلب (MOQ) وتفاصيل التعبئة ومدة التسليم والشرط التجاري الذي طلبته. ويمكن تسعير مستويات التصنيع الأساسية والمتوسطة والممتازة جنبًا إلى جنب.

      FOB أو CIF
    4. 04

      اعتماد العيّنة

      نرسل عيّنة لاعتماد التشطيب والوظيفة والتغليف. تُنتَج العيّنات بالعلامة التجارية بعد تأكيد التصميم الفني.

      قبل الإنتاج الكمي
    5. 05

      الإنتاج والشحن

      يبدأ الإنتاج بالجملة بعد اعتماد العيّنة ودفع العربون. ويجري ضبط الجودة والفحص قبل التحميل، ثم يُشحن الطلب إلى الميناء المتفق عليه.

      30–45 يومًا بعد الاعتماد
    50+ نطوّر طُرزًا جديدة كل عام، مواكبةً لاتجاهات السوق الأمريكية الشمالية والأوروبية الحالية
    12 ساعة عمل الحد الأقصى لزمن الرد الأول على الاستفسار
    منذ 2000 مصنع في فوشان، للتجارة بين الشركات (B2B) فقط

    OEM و ODM وفق مواصفاتك

    نطوّر المنتجات وفق متطلباتكم. أرسل موديلًا مرجعيًا أو رسمًا أو حتى النطاق السعري والسوق المستهدف، وسنقترح ما يناسب. تتوفر الفئات الاقتصادية والمتوسطة والراقية جميعها من المصنع نفسه.

    • شعارك على المنتج والكرتون والوثائق
    • تغليف العلامة الخاصة وأدلة الاستخدام
    • لمسة نهائية مخصصة تطابق معيارك
    • أبعاد وقوالب مخصصة عندما تسمح الكميات بذلك
    • تطوير المنتج انطلاقًا من مرجعك أو السعر المستهدف
    • مستندات السوق الوجهة تُجهَّز عند الطلب

    الأسئلة الشائعة

    هل GL018 أقرب إلى الرمادي أم الأسود؟

    GL018 أقرب إلى الرمادي الفحمي. له مظهر داكن، لكن لا ينبغي تحديده كمغسلة سوداء صلبة عادية. ويمنحه سطح الزجاج المنقوش عمقًا رماديًا أكبر وتنوعًا في السطح.

    ما مقاس وحدة المغسلة الذي ينبغي أن يفحصه المشترون للموديل GL018؟

    ينبغي للمشترين فحص المسقط 460 × 330 مم مقابل سطح الوحدة. وينبغي مراجعة عمق سطح العمل والخلوص من الجدار الخلفي وموضع الصنبور وموقع فتحة الصرف ومساحة سطح العمل المتبقية قبل الطلب.

    هل يؤثر ارتفاع الحوض البالغ 100 مم على اختيار الصنبور؟

    نعم. GL018 مغسلة علوية بارتفاع 100 مم، لذا يجب أن يتمتع الصنبور بارتفاع ومدى فوّهة كافيين لتجاوز الحافة وتوجيه الماء إلى الحوض.

    هل GL018 هو نفسه المغسلة الزجاجية السوداء الشفافة؟

    لا. الطراز GL018 مغسلة علوية زجاجية بملمس رمادي فحمي. يركز الزجاج الأسود الشفاف عادةً على الشفافية الدخانية، بينما يتحدد الطراز GL018 بدرجته الرمادية وملمسه متعدد الطبقات.

    هل الصنبور والمصرف مضمّنان مع GL018؟

    ينبغي تأكيد الصنبور والمصرف وملحقات التركيب مع عرض السعر النهائي أو تكوين الطلب. وتركّز مواصفات GL018 المعروضة هنا على جسم الحوض والمادة والمقاس ونوع التركيب فوق سطح العمل.